Table 99 Port Configuration Menu options
Command | Description |
|
|
gig | Displays the Gigabit Ethernet Physical Link Menu. |
|
|
aclqos | Displays the Access Control List (ACL)/Quality of Service (QoS) |
| configuration menu. |
|
|
8021ppri | Configures the port’s 802.1p priority level. |
|
|
pvid | Sets the default VLAN number which will be used to forward frames |
| which are not VLAN tagged. The default number is 1. |
| Note: VLAN 4095 is reserved for switch management. |
|
|
name | Sets a name for the port (maximum 64 characters). The assigned port |
| name displays next to the port number on some information and statistics |
| screens. |
|
|
rmon enabledisable | Enables or disables Remote Monitoring for the port. RMON must be |
| enabled for any RMON configurations to function. |
|
|
tag enabledisable | Disables or enables VLAN tagging for this port. It is disabled by default. |
|
|
tagpvid enabledisable | Disables or enables VLAN tag persistence. When disabled, the VLAN tag |
| is removed from packets whose VLAN tag matches the port PVID. The |
| default value is enabled. |
|
|
*media | Displays the current port’s transmission media: copper, fiber, or |
| auto |
| This option is only available on uplink ports. |
| This option applies only to the GbE2c Layer 2/3 Ethernet Blade Switch. |
|
|
*fiber | Configures the port’s transmission media as fiber. |
| This option is only available on uplink ports. |
| This option applies only to the GbE2c Layer 2/3 Ethernet Blade Switch. |
|
|
*copper | Configures the port’s transmission media as copper. |
| This option is only available on uplink ports. |
| This option applies only to the GbE2c Layer 2/3 Ethernet Blade Switch. |
|
|
*automedia | Configures the port’s transmission media as auto. |
| This option is only available on uplink ports. |
| This option applies only to the GbE2c Layer 2/3 Ethernet Blade Switch. |
|
|
brate | Limits the number of broadcast packets per second to the specified value. |
| If disabled (dis), the port forwards all broadcast packets. |
|
|
mrate | Limits the number of multicast packets per second to the specified value. If |
| disabled (dis), the port forwards all multicast packets. |
|
|
drate | Limits the number of unknown unicast packets per second to the specified |
| value. If disabled (dis), the port forwards all unknown unicast packets. |
|
|
ena | Enables the port. |
|
|
dis | Disables the port. To temporarily disable a port without changing its |
| configuration attributes, see the “Temporarily disabling a port” section |
| later in this chapter. |
|
|
cur | Displays current port parameters. |
* indicates commands that are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
Configuration Menu 107
