Maintenance Menu | HP xw460c Blade instruction

Maintenance Menu

Introduction

The Maintenance Menu is used for debugging purposes, enabling you to generate a technical support dump of the critical state information in the switch, and to clear entries in the Forwarding Database and the Address Resolution Protocol (ARP) and routing tables. This menu is available only from an administrator and operator login.

Menu information

Command: /maint

[Maintenance	Menu]
sys	- System Maintenance Menu
fdb	- Forwarding Database Manipulation Menu
debug	- Debugging Menu
arp	- ARP Cache Manipulation Menu
route	- IP Route Manipulation Menu
igmp	- IGMP Multicast Group Menu
uudmp	- Uuencode FLASH dump
ptdmp	- Upload FLASH dump via FTP/TFTP
cldmp	- Clear FLASH dump
panic	- Dump state information to FLASH and reboot
tsdmp	- Tech support dump
pttsdmp	- Upload tech support dump via FTP/TFTP

Dump information contains internal switch state data that is written to flash memory on the switch after any one of the following occurs:

•The switch administrator forces a switch panic. The panic option, found in the Maintenance Menu, causes the switch to dump state information to flash memory, and then causes the switch to reboot.

•The switch administrator enters the switch reset key combination (Ctrl-Shift-6) on a device that is attached to the console port.

•The switch detects a hardware or software problem that requires a reboot.

The following table describes the Maintenance Menu options.

Table 185	Maintenance Menu options

Command	Usage

sys	Displays the System Maintenance Menu.

fdb	Displays the Forwarding Database Manipulation Menu.

debug	Displays the Debug Menu.

arp	Displays the ARP Cache Manipulation Menu.

route	Displays the IP Route Manipulation Menu.

igmp	Displays the IGMP Maintenance Menu.

uudmp	Displays dump information in uuencoded format.

ptdmp	Saves the system dump information via FTP/TFTP.

cldmp	Clears dump information from flash memory.

panic	Dumps MP information to flash and reboots.

tsdmp	Dumps all switch information, statistics, and configuration.

pttsdmp	Redirects the technical support dump (tsdmp) to an external FTP/TFTP server.

Maintenance Menu 166

Image 166

HP xw460c Blade manual Maintenance Menu

Contents

HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Page Contents Statistics Menu Configuration Menu 111 Index Command line interface Additional references Connecting to the switchIntroduction Establishing a console connection Establishing a Telnet connection Setting an IP addressTelnet GbE2c Ethernet Blade Switch IP address Establishing an SSH connection Accessing the switch # ssh user@GbE2c Ethernet Blade Switch IP address Idle timeout Typographical conventions AaBbCc123 Main Menu Menu summary Delay Global commandsTraceroute host name IP address max-hops msec Command line history and editing Telnet hostname IP address port Command abbreviation Command line interface shortcutsCommand stacking Tab completion Main# /cfg Configuring Simple Network Management Protocol support# /cfg/sys/access/snmp disableread onlyread/write # /cfg/sys/ssnmp/rcommwcomm Changing the default administrator password Setting passwordsSystem# apply System# save Changing the default user password Changing the default operator password Information Menu Menu overview System Information Menu SNMPv3 Information Menu Comm AdminshaSNMPv3 USM User Table information V1v2only SNMPv3 Access Table information SNMPv3 View Table information SNMPv3 Community Table information SNMPv3 Group Table informationPrefix SNMPv3 Target Address Table information SNMPv3 Target Parameters Table information SNMPv3 Notify Table information Command /info/sys/snmpv3/notify NameTag V1v2trapv1v2trapSec Level SNMPv3 dump System information Show last 100 syslog messages System user information Layer 2 information Cfg/sys/access/user/uid command8021x Stp Find MAC address Vlan FDB information menuPort port number Link Aggregation Control Protocol information Show all FDB information Lacp dump 802.1x information Command /info/l2/stp Port Auth ModeAuthenticator PAE State Spanning Tree information Priority bridge Current RootPath-Cost Hello Desg 8017 P2P2,Edge Rapid Spanning Tree and Multiple Spanning Tree informationDesignated port Desg 8018 Disabled DSB Common Internal Spanning Tree information Trunk group information Disabled DSBDiscarding Disc , Learning LRN , Forwarding FWD , or Layer 2 general information Vlan informationLayer 3 information Gw IP address Route informationFind IP address If IP address Show all IP Route information Show all ARP entry information Command /info/arp/dump IP address Flags MAC addressARP information Vlan Nbr nbr router-id A.B.C.D Ospf informationDbase Sumaddr Nsumadd Routes Dump Ospf interface information Ospf general informationOspf Database information menu Ext adv-rtr A.B.C.D linkstateid A.B.C.Dself Advrtr router-id A.B.C.DAsbrsum adv-rtr A.B.C.D Linkstateid A.B.C.Dself Nw adv-rtr A.B.C.D linkstateid A.B.C.Dself Routing Information Protocol information Ospf route codes informationRIP Routes information IP information RIP user configurationIgmp multicast group information Igmp multicast router port information Command /info/l3/vrrp Vrrp informationVrrp information QoS Menu 8021p Show QOS 802.1p information QoS information802.1p information 8021p ACL information Rmon Information Menu Rmon history information Interval Command /info/rmon/event Rmon alarm informationRmon event information Link status information Port information Command /info/port Port Tag Rmon PvidVLANs Logical Port to GEA Port mapping Command /info/geaport Logical Port GEA Port0-based GEA UnitUplink Failure Detection Enabled LtM status Down Member Uplink Failure Detection information Command /info/dump Information dump Ntp clear Menu informationUfd clear Port Statistics Menu 802.1x statistics AuthenticatingAuthSuccessesWhile BackendNonNakResponsesFrom Bridging statisticsSupplicant Ethernet statistics Dot3StatsSingleCollisionFrames Dot3StatsFCSErrorsDot3StatsInternalMacTransmitErrors Dot3StatsMultipleCollisionFrames Interface statistics Internet Protocol IP statistics Link statistics Port Rmon statistics Layer 2 statistics FDB statistics Arp clear Lacp statisticsLayer 3 statistics Clrigmp 1- 4095 all IP statistics GEA Layer 3 statistics menuGEA Layer 3 statistics L3 bucket for An IP address Dump Route statistics ARP statistics DNS statistics Icmp statistics TCP statistics UDP statistics Ospf statistics menu Command /stats/l3/ospfIgmp Multicast Group statistics Ospf stats Menu Ospf global statistics Tx ls Updates Nbr change Timers Kickoff Vrrp statistics RIP statistics Command /stats/l3/ripManagement Processor statistics Packet statistics Allocs 10ad41e8/10ad5790 CPU statistics Access Control List ACL statistics menuACL statistics Snmp statistics Only NTP statistics Statistics dump Command /stats/dumpUplink Failure Detection statistics Number of times LtM link in Blocking Configuration Menu Viewing pending changes Saving the configurationViewing, applying, reverting, and saving changes Applying pending changes System configuration Reminders Bannr 1-80 characters System host log configurationLine to end Host IP address Console disableenable Secure Shell Server configurationLog featureall enabledisable Intrval Radius server configurationCommand /cfg/sys/radius Sshport TCP port number TACACS+ server configuration Telnet enabledisable Port TCP port number Dlight disableenable NTP server configurationSystem Snmp configuration Command /cfg/sys/ssnmp Name 1-64 characters SNMPv3 configurationCharacters User Security Model configuration V1v2 disableenable Tree 1-32 characters SNMPv3 View configurationName 1-32 characters Mask 1-32 characters Usmsnmpv1snmpv2 Level View-based Access Control Model configurationSNMPv3 Group configuration NoAuthNoPrivauthNo Usmsnmpv1snmpv2 Uname SNMPv3 Community Table configurationDel Deletes the vacmSecurityToGroup entry Cur Addr transport SNMPv3 Target Address Table configurationSNMPv3 Target Parameters Table configuration Address ip Port transport SNMPv3 Notify Table configuration Snmpv1snmpv2csnmp Model System Access configuration Management Networks configuration User ID configuration User Access Control configurationUseroperadmin Name Https Access configuration Port configurationAccess enabledisable Name 1-64 characters none Port link configuration Temporarily disabling a port 802.1x configuration Layer 2 configurationPort ACL/QoS configuration Mode force 802.1x Global configurationUnauthautoforce-auth 802.1x Port configuration Reauth onoff Mode rstpmstp Rev Port parameter menu Common Internal Spanning Tree configurationBridge parameter menu 4095 Cist bridge configuration Cist port configuration Cost Spanning Tree configurationEdge disableenable Link autop2pshared Bridge Spanning Tree configuration Spanning Tree port configuration Cur Display current port Spanning Tree parameters Static FDB configuration Forwarding Database configurationFastfwd disableenable Clear mac MAC AddressVLAN 1-4095 Port port numberAll Trunk configurationMAC address Vlan port Add port number Layer 2 IP Trunk Hash configuration IP Trunk Hash configurationLink Aggregation Control Protocol configuration Timeout shortlong Lacp Port configurationVlan configuration Mode offactivepassive Port number Layer 3 configurationList of port numbers Addr IP address IP interface configurationMask IP subnet mask IP Static Route configuration Default Gateway configuration Network Filter configuration Address Resolution Protocol configurationIP Forwarding configuration Dirbr disableenable Ap AS number AS number AS Route Map configurationLp 0-4294967294 none Metric 1-4294967294none IP Access List configurationAutonomous System Path configuration Action permitdeny Routing Information Protocol configuration RIP Interface configuration Add 1-32 1-32all Open Shortest Path First configurationRIP Route Redistribution configuration Remove 1-32 1-32all Md5key 1-255 characters Osfp Area Index configurationDefault 1-16777215 12none Redist fixedstaticrip Areaid IP address Ospf Summary Range configurationAuth nonepasswordmd5 Type transitstubnssa Key key stringnone Ospf Interface configurationMask IP address mask Mdkey 1-255none Key password Ospf Virtual Link configurationNbr IP address Rem 1-32 1-32 ... all Ospf Host Entry configurationOspf Route Redistribution configuration Export 1-16777215 12none Igmp configuration Ospf MD5 Key configuration Fastlv 1-4095 disableenable Igmp snooping configurationAggr disableenable Srcip IP address Add port number 1-4095 Igmp static multicast router configurationIgmp filtering configuration Filter Range IP multicast address IP Igmp filtering port configurationIgmp filter definition Multicast address Bootstrap Protocol Relay configuration Domain Name System configuration Virtual Router Redundancy Protocol configuration Vrrp Virtual Router configuration Preem disableenable Vrs disableenable Vrrp Virtual Router Priority Tracking configurationVrrp Virtual Router Group configuration Ifs disableenable Vrrp Virtual Router Group Priority Tracking configuration Vrrp Tracking configuration Vrrp Interface configurationPassw password Access Control configuration Quality of Service configurationQoS 802.1p configuration Action permitdenysetprio Access Control List configurationEgrport port number Stats ed ACL Ethernet Filter configuration ACL IP Version 4 Filter configuration Sport 1-65535 port mask ACL TCP/UDP Filter configurationFlags value 0x0-0x3f Enable ed ACL Meter configurationACL Re-mark configuration Cir ACL Re-mark In-Profile Update User Priority configuration ACL Re-mark In-Profile configurationACL Re-mark Out-of-Profile configuration ACL Packet Format configuration Remote Monitoring configurationACL Group configuration Ifoid 1-127 characters Rmon history configurationOwner 1-127 characters Descn 1-127 characters Rmon event configurationRmon alarm configuration Type nonelogtrapboth 2147483647 Port mirroringRlimit -2147483647 to Flimit -2147483647 to Add mirrored port inoutboth Uplink Failure Detection configurationPort-based port mirroring Rem mirrored port Addport port number Failure Detection Pair configurationLink to Monitor configuration Remport port number Dump Saving the active switch configurationLink to Disable configuration Addport port number Remport port number Command /cfg/gtcfg FTP/TFTP server filename Restoring the active switch configurationConfiguration# gtcfg FTP/TFTP server filename Operations Menu Operations-level port options Operations-level port 802.1x options Reset ReauthOperations-level Vrrp options Updating the switch software image Downloading new software to the switch Selecting a software image to run Address Boot Options# ptimg Uploading a software image from the switchSelecting a configuration block Boot Options# conf Boot Options# reset Resetting the switchAccessing the Iscli Boot Options# cur Maintenance Menu Flags new Nvram flags word as System maintenance optionsForwarding Database options 0xXXXXXXXX Debugging options ARP cache options Igmp Multicast Group options IP Route Manipulation optionsBroadcastmartian Igmp Snooping options Igmp Mrouter options FTP/TFTP system dump put Uuencode flash dumpClearing dump information Confirm dump and reboot y/n y Panic commandCommand /maint/panic Unscheduled system dumps Index