HP xw460c Blade manual Vrrp Interface configuration, Vrrp Tracking configuration, Passw password

The following table describes the Virtual Router Group Priority Tracking Configuration Menu options.

Table 154 Virtual Router Group Priority Tracking Configuration Menu options

Command	Description
ifs disableenable	When enabled, the priority for this virtual router will be increased for each
	other IP interface active on this switch. An IP interface is considered active
	when there is at least one active port on the same VLAN. This helps elect the
	virtual routers with the most available routes as the master. This command is
	disabled by default.
ports disableenable	When enabled, the priority for this virtual router will be increased for each
	active port on the same VLAN. A port is considered “active” if it has a link and
	is forwarding traffic. This helps elect the virtual routers with the most available
	ports as the master. This command is disabled by default.
cur	Displays the current configuration for priority tracking for this virtual router.

VRRP Interface configuration

Command: /cfg/l3/vrrp/if <1-255>

[VRRP Interface		1 Menu]
auth	-	Set	authentication types
passw	-	Set	plain-text password
del	-	Delete interface
cur	-	Display current VRRP interface configuration

NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.

This menu is used for configuring VRRP authentication parameters for the IP interfaces used with the virtual routers. The interface-number(1 to 255) represents the IP interface on which authentication parameters must be configured.

The following table describes the VRRP Interface Configuration Menu options.

Table 155 VRRP Interface Configuration Menu options

Command	Description
auth nonepassword	Defines the type of authentication that will be used: none (no authentication),
	or password (password authentication).
passw <password>	Defines a plain text password up to eight characters long. This password will
	be added to each VRRP packet transmitted by this interface when password
	authentication is chosen (see auth above).
del	Clears the authentication configuration parameters for this IP interface. The IP
	interface itself is not deleted.
cur	Displays the current configuration for this IP interface’s authentication
	parameters.

VRRP Tracking configuration

Command: /cfg/l3/vrrp/track

[VRRP Tracking Menu]
vrs	- Set priority increment for virtual router tracking
ifs	- Set	priority increment for IP interface tracking
ports	- Set	priority increment for VLAN switch port tracking
cur	- Display current VRRP Priority Tracking configuration

NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.

This menu is used for setting weights for the various criteria used to modify priority levels during the master router election process. Each time one of the tracking criteria is met, the priority level for the virtual router is increased by an amount defined through this menu.

Configuration Menu 145