Use this command to display link status information about each port on a switch, including:
•Port number
•Port speed (10 Mb/s, 100 Mb/s, 1000 Mb/s, or any)
•Duplex mode (half, full, or any)
•Flow control for transmit and receive (no, yes, or any)
•Link status (up or down)
Port information
Command: /info/port
Port Tag RMON PVID | NAME | VLAN(s) | |||
1 | n | d | 1 | Downlink1 | 1 |
2 | n | d | 1 | Downlink2 | 1 |
3 | n | d | 1 | Downlink3 | 1 |
4 | n | d | 1 | Downlink4 | 1 |
5 | n | d | 1 | Downlink5 | 1 |
6 | n | d | 1 | Downlink6 | 1 |
7 | n | d | 1 | Downlink7 | 1 |
8 | n | d | 1 | Downlink8 | 1 |
9 | n | d | 1 | Downlink9 | 1 |
10 | n | d | 1 | Downlink10 | 1 |
11 | n | d | 1 | Downlink11 | 1 |
12 | n | d | 1 | Downlink12 | 1 |
13 | n | d | 1 | Downlink13 | 1 |
14 | n | d | 1 | Downlink14 | 1 |
15 | n | d | 1 | Downlink15 | 1 |
16 | n | d | 1 | Downlink16 | 1 |
17 | n | d | 1 | Xconnect1 | 1 |
18 | n | d | 1 | Xconnect2 | 1 |
19 | n | d | 4095 | Mgmt | 4095 |
20 | n | d | 1 | Uplink1 | 1 |
21 | n | d | 1 | Uplink2 | 1 |
22 | n | d | 1 | Uplink3 | 1 |
23 | n | d | 1 | Uplink4 | 1 |
24 | n | d | 1 | Uplink5 | 1 |
Port information includes:
•Port number
•Whether the port uses VLAN tagging or not (y or n)
•Whether Remote Monitoring (RMON) is enabled or disabled (e or d)
•Port VLAN ID (PVID)
•Port name
•VLAN membership
Information Menu 58
