HTTPS Access configuration
Command: /cfg/sys/access/https
[https Menu] |
|
|
access | - Enable/Disable HTTPS | Web access |
port | - HTTPS WebServer port | number |
generate | - Generate | HTTPS server certificate |
certSave | - save HTTPS certificate | |
cur | - Display current SSL Web Access configuration | |
|
|
|
The following table describes the HTTPS Access Configuration Menu options.
Table 98 HTTPS Access Configuration Menu options
Command | Description | |
|
| |
access enabledisable | Enables or disables BBI access (Web access) using HTTPS. The default value is | |
| disabled. | |
|
| |
port <TCP port number> | Defines the HTTPS Web server port number. | |
|
| |
generate | Allows you to generate a certificate to connect to the SSL to be used during the key | |
| exchange. A default certificate is created when HTTPS is enabled for the first time. The | |
| user can create a new certificate defining the information that they want to be used in | |
| the various fields. For example: | |
| • | Country Name (2 letter code) [ ]: CA |
| • | State or Province Name (full name) [ ]: Ontario |
| • | Locality Name (for example, city) [ ]: Ottawa |
| • | Organization Name (for example, company) [ ]: |
| • | Organizational Unit Name (for example, section) [ ]: ProLiant |
| • | Common Name (for example, user’s name) [ ]: Mr Smith |
| • | Email (for example, email address) [ ]: info@hp.com |
| You must confirm if you want to generate the certificate. It takes approximately | |
| 30 seconds to generate the certificate. Then the switch restarts SSL agent. | |
|
| |
certSave | Allows the client, or the Web browser, to accept the certificate and save the certificate | |
| to Flash to be used when the switch is rebooted. | |
|
| |
cur | Displays the current SSL Web Access configuration. | |
|
|
|
Port configuration
Command: /cfg/port <port number>
[Port 1 Menu] |
|
gig | - Gig Phy Menu |
aclqos | - Acl/Qos Configuration Menu |
8021ppri | - Set default 802.1p priority |
pvid | - Set default port VLAN id |
name | - Set port name |
rmon | - Enable/Disable RMON for port |
tag | - Enable/disable VLAN tagging for port |
tagpvid | - Enable/disable tagging on pvid |
media | - Current media copper/fiber |
fiber | - Set fiber |
copper | - Set copper |
automedia - Set Auto | |
brate | - Set BroadCast Threshold |
mrate | - Set MultiCast Threshold |
drate | - Set Dest. Lookup Fail Threshold |
ena | - Enable port |
dis | - Disable port |
cur | - Display current port configuration |
|
|
This menu enables you to configure settings for individual switch ports. This command is enabled by default.
NOTE: Port 19 is reserved for switch management.
The following table describes the Port Configuration Menu options.
Configuration Menu 106
