![](/images/new-backgrounds/1220827/220827185x1.webp)
The following table describes the SSHD Configuration Menu options.
Table 80 SSHD Configuration Menu options
Command | Description |
|
|
intrval | Defines interval for |
| |
| The value of zero (0) means the RSA server key |
| disabled. If the switch has been busy performing any other key generation |
| and the assigned time of interval expires, the RSA server will skip |
| generating the key. |
|
|
scpadm | Defines the administrator password that is for Secure Copy (SCP) only. The |
| username for this SCP administrator is scpadmin. |
| Typically, SCP is used to copy files securely from one machine to another. |
| In the switch, SCP is used to download and upload the switch configuration |
| using secure channels. |
|
|
hkeygen | Generates the RSA host keys manually. The switch creates this key |
| automatically while configuring the switch with Secure Shell (SSH). But you |
| can generate the key manually by using this command if you need to |
| overwrite the key for security reasons. The command will take effect |
| immediately without executing the apply command. |
|
|
skeygen | Generates the RSA server key. The switch creates this key automatically |
| while configuring the switch with Secure Shell (SSH). You can generate the |
| key manually by using this command if you need to overwrite the key for |
| security reasons. The command will take effect immediately without |
| executing the apply command. |
|
|
sshport <TCP port number> | Sets the SSH server port number. |
|
|
ena | Enables the SCP apply and save. |
|
|
dis | Disables the SCP apply and save. This is the default for SCP. |
|
|
on | Enables the SSH server. |
|
|
off | Disables the SSH server. This is the default for the SSH server. |
|
|
cur | Displays the current SSH server configuration. |
|
|
RADIUS server configuration
Command: /cfg/sys/radius
[RADIUS Server | Menu] | |
prisrv | - | Set primary RADIUS server address |
secsrv | - | Set secondary RADIUS server address |
secret | - | Set primary RADIUS server secret |
secret2 | - | Set secondary RADIUS server secret |
port | - | Set RADIUS port |
retries | - | Set RADIUS server retries |
timeout | - | Set RADIUS server timeout |
telnet | - | Enable/disable RADIUS backdoor for telnet/ssh/http/https |
secbd | - | Enable/disable RADIUS secure backdoor for telnet/ssh/http/https |
on | - | Turn RADIUS authentication ON |
off | - | Turn RADIUS authentication OFF |
cur | - | Display current RADIUS configuration |
NOTE: See the HP GbE2c Ethernet Blade Switch for
RADIUS.
Configuration Menu 93