HP xw460c Blade manual User Security Model configuration, V1v2 disableenable

SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2 Framework by supporting the following:

•a new SNMP message format

•security for messages

•access control

•remote configuration of SNMP parameters

For more details on the SNMPv3 architecture please see RFC2271 to RFC2275.

The following table describes the SNMPv3 Configuration Menu options.

Table 85 SNMPv3 Configuration Menu options

Command	Description
usm <1-16>	Configures a user security model (USM) entry for an authorized user. You can also
	configure this entry through SNMP. The range is 1-16.
view <1-128>	Configures different MIB views. The range is 1-128.
access <1-32>	Configures access rights. The View-based Access Control Model defines a set of services
	that an application can use for checking access rights of the user. You need access
	control when you have to process retrieval or modification request from an SNMP entity.
	The range is 1-32.
group <1-16>	Configures an SNMP group. A group maps the user name to the access group names
	and their access rights needed to access SNMP management objects. A group defines
	the access rights assigned to all names that belong to a particular group. The range is 1-
	16.
comm <1-16>	Configures a community table entry. The community table contains objects for mapping
	community strings and version-independent SNMP message parameters.
	The range is 1-16.
taddr <1-16>	Configures the destination address and user security levels for outgoing notifications. This
	is also called the transport endpoint. The range is 1-16.
tparam <1-16>	Configures SNMP parameters, consisting of message processing model, security model,
	security level, and security name information. There may be multiple transport endpoints
	associated with a particular set of SNMP parameters, or a particular transport endpoint
	may be associated with several sets of SNMP parameters.
notify <1-16>	Configures a notification index. A notification application typically monitors a system for
	particular events or conditions, and generates Notification-Class messages based on
	these events or conditions. The range is 1-16.
v1v2 disableenable	Enables or disables the access to SNMP version 1 and version 2. This command is
	enabled by default.
cur	Displays the current SNMPv3 configuration.

User Security Model configuration

Command: /cfg/sys/ssnmp/snmpv3/usm

[SNMPv3 usmUser		1 Menu]
name	-	Set USM user name
auth	-	Set authentication protocol
authpw	-	Set authentication password
priv	-	Set privacy protocol
privpw	-	Set privacy password
del	-	Delete usmUser entry
cur	-	Display current usmUser configuration

You can make use of a defined set of user identities using this Security Model. An SNMP engine must have the knowledge of applicable attributes of a user.

This menu helps you create a user security model entry for an authorized user. You need to provide a security name to create the USM entry.

The following table describes the User Security Model Configuration Menu options.

Configuration Menu 98