•SNMP parameters that can be modified include:
•System name
•System location
•System contact
•Use of the SNMP system authentication trap function
•Read community string
•Write community string
The following table describes the System SNMP Configuration Menu options.
Table 84 System SNMP Configuration Menu options
Command |
| Description |
|
|
|
snmpv3 |
| Displays SNMPv3 menu. |
|
| |
name | Configures the name for the system. The name can have a maximum of 64 characters. | |
|
|
|
locn | characters> | Configures the name of the system location. The location can have a maximum of 64 |
|
| characters. |
|
|
|
cont | characters> | Configures the name of the system contact. The contact can have a maximum of 64 |
|
| characters. |
rcomm
wcomm
timeout | Sets the timeout value for the SNMP state machine. The range is |
| default value is 5 minutes. |
|
|
auth disableenable | Enables or disables the use of the system authentication trap facility. The default setting |
| is disabled. |
|
|
linkt <port> | Enables or disables the sending of SNMP link up and link down traps. The default |
[disableenable] | setting is enabled. |
|
|
ufd | Enables or disables the sending of Uplink Failure Detection traps. The default setting is |
| disabled. |
|
|
cur | Displays the current SNMP configuration. |
|
|
SNMPv3 configuration
Command: /cfg/sys/ssnmp/snmpv3
[SNMPv3 Menu] |
|
usm | - usmUser Table Menu |
view | - vacmViewTreeFamily Table Menu |
access | - vacmAccess Table Menu |
group | - vacmSecurityToGroup Table Menu |
comm | - community Table Menu |
taddr | - targetAddr Table Menu |
tparam | - targetParams Table Menu |
notify | - notify Table Menu |
v1v2 | - Enable/disable V1/V2 access |
cur | - Display current SNMPv3 configuration |
|
|
Configuration Menu 97
