6Configure SmartFeatures settings
Configure SmartPower settings
Philips continuously focuses on lowering the environmental impact of its consumer products by adopting energy efficient ways of power management.
This section describes how to select a setting for maximum power savings.
1Press M on the setup remote control to display the setup menu.
2 Press 
to select CONFIGURATION > SMARTFEATURES.
SMARTFEATURES |
|
SMARTPOWER | OFF |
AUTOSENSE | NO |
LOW POWER STANDBY | NO |
SMARTGUIDE CATEGORIES | > |
USB | NO |
SMARTUPDATE | NO |
SW DOWNLOAD | > |
3Press 
to select one of the following to configure the settings:
•SMARTPOWER: Sets a power saving mode. Select one of the following :
•OFF: Rich and dynamic settings, ideal for daylight use. Disables power savings.
•LOW: A natural picture setting. Achieves low power savings.
•MEDIUM: Ideal settings for watching movies. Achieves medium power savings.
•HIGH: Applies
•AUTOSENSE: Reduces the TV’s power consumption according to the room’s ambient light. Select YES to enable the TV’s built- in ambient light sensor. AUTOSENSE ia available in selected models only.
•LOW POWER STANDBY: Uses minimum power when the TV is in standby mode.
Note
••If LOW POWER STANDBY is set to YES,
••the TV can only be switched on with a remote control. Please ensure the remote control is always available. The control buttons at the side of the TV will not be able to switch on the TV.
••If LOW POWER STANDBY is set to YES, the TV will be configured to the optimal energy saving mode whenever the TV is switched to standby mode. As a result, the TV will take a little longer to switch on again. If you need a fast switch on time, select NO.
Configure SmartGuide Categories
This section provides information to configure SmartGuide Categories icons. Guests can access these icons by pressing the CHANNEL GUIDE button on the guest remote control to display the SmartGuide Categories screen. Refer to the previous chapter for information to assign TV channels to categories (see ‘Select a ring’ on page 4).
1 | Press M on the setup remote control to display the setup menu. | |
2 | Press | to select CONFIGURATION > SMARTFEATURES |
> SMARTGUIDE CATEGORIES.
SMARTFEATURES |
|
SMARTPOWER | OFF |
AUTOSENSE | NO |
LOW POWER STANDBY | NO |
SMARTGUIDE CATEGORIES | > |
USB | NO |
SMARTUPDATE | NO |
SW DOWNLOAD | > |
3Press 
to select one of the following to configure the settings:
•CHANNEL GUIDE KEY: Sets the default screen that will be shown when you press the CHANNEL GUIDE button on the remote control. Select between SMARTGUIDE categories or CHANNEL LIST screen.
•HIGH DEFINITION: Enables or disables the high definition icon in the SmartGuide Categories screen.
•SPORTS: Enables or disables the sports icon in the SmartGuide Categories screen.
•NEWS: Enables or disables the news icon in the SmartGuide Categories screen.
•KIDS: Enables or disables the kids icon in the SmartGuide Categories screen.
•MOVIES: Enables or disables the movies icon in the SmartGuide Categories screen.
•NETWORK: Enables or disables the network icon in the SmartGuide Categories screen.
•ADULT: Enables or disables the adult icon in the SmartGuide Categories screen.
•LIFESTYLE: Enables or disables the lifestyle icon in the SmartGuide Categories screen.
•OTHERS: Enables or disables the others icon in the SmartGuide Categories screen.
Configure SmartSecure settings
1Press M on the setup remote control to display the setup menu.
2 Press to select CONFIGURATION > SECURITY >
SMARTSECURE.
English
EN 7
