Modifying Kernel Configuration
Removing All IPC-1600 Boards
To remove all IPC-1600 board information from the kernel, log in as “root” and execute removepkg. When prompted, select the “IPC-1600, Intelligent Ports Card — Version 1.0” item.
Changing IPC-1600 Configuration
You can reinstall the driver on top of the current driver when you need to add or change the IPC-1600 configuration information. To change the existing configuration of IPC-1600 board(s), reinstall the “Intelligent Ports Card (IPC-1600) UNIX System V/386 Device Drivers, Version 1.0” software package (installpkg). Specify the proper number of boards and then assign the appropriate interrupt request level, I/O address, and starting memory controller address for each board.
Following shutdown, power down the system and set the DIP switches on the IPC-1600 to match the information specified to the device driver. The new configuration will be installed when the system is powered up.
UNIX SYSTEM DEVICE DRIVER INSTALLATION 3-19
