Guide Organization
This guide provides directions on how to install and set up the AT&T Intelligent Ports Card, Model 1600 (IPC-1600). It also explains how the product interacts with other components of your computer system and advises you on troubleshooting.
The remainder of this guide is divided into the following:
■Chapter 2, “MS-DOS* Device Driver Installation,” describes how to install the MS-DOS device driver software.
■Chapter 3, “UNIX® System Device Driver Installation,” describes how to install the UNIX system device driver software.
■Chapter 4, “Hardware Installation,” provides general information about installing the IPC-1600 board. Refer to the documentation that came with your system for information about installing and removing expansion bus slot boards.
■Chapter 5, “Managing the Serial Ports,” defines the IPC-1600 device node names and describes how to administer (manage) the serial ports using either the hipcutils(1) command or the optional AT&T Framed Access Command Environment (FACE) subsystem under the UNIX system.
■Chapter 6, “System Features,” reviews the IPC-1600 system features.
■Chapter 7, “Troubleshooting the Intelligent Ports Card,” describes how to run diagnostic tests supplied on the “Intelligent Ports (IPC-1600) MS-DOS Device Drivers and Diagnostics, Version 1.0” diskette. Information on how to use the Intelligent Ports Card with other products and other “Helpful Hints” are also provided in this chapter.
* Registered trademark of Microsoft Corporation
