Preparation

Prepare Machine for Installation

If the machine is powered-up and is running the UNIX operating system, use the shutdown command to bring down the operating system as shown in the following screen display.

#cd /

#shutdown

Set the power switch of the system and of all external devices to “OFF.”

Unplug the system module power cord.

Using the documentation that came with your machine, prepare an expansion bus slot for the installation of a board. This will typically require the removal of a cover and a board slot filler plate.

4-2 IPC-1600 USER’S GUIDE

Page 69
Image 69
AT&T IPC-1600 manual Preparation, Prepare Machine for Installation