Bypass: The bypass key (and # key) can be used to bypass zones. Press 'Bypass', the number of the zone to bypass and click 'Bypass' again.
Status: The 'Status' button brings up a display of all zones defined in the currently selected area, along with their status (“Normal”, “Bypassed”, “Violated”) and state (“Short”, “Open”, “EOL”).
8.Along the left side of the screen are additional buttons which may be used to access the automation functions
such as: Lighting, Tasks, Climate (Temp Sensors & HVAC), and Outputs. For example, click the 'Lighting' button to bring up the following screen. This screen populates itself with the names and current status of any lighting devices that have been programmed in the Control with a name and the "Show" option enabled. Each device has an On/Off indicator as well as a dimming "slider". The slider allows a dimmable light to be adjusted from 0 (Off) to 100% (full on). The On/Off indicator will be Green when the device is On. If there are too many lights to fit on one screen the word Next> will illuminate along the bottom of the screen. Click on Next> to see additional lights or <Prev to back up to the previous group of lights.
Page 16 |