Elk M1XEP installation manual Table of Contents, Important Notice

Table of Contents
Features and Specifications	3
Basics of Networking	4
Installation and Hookup	5
Configuration and Setup	6
Basic Network Setup	6
Send Changes to M1XEP and Save	7
Setup of Web Browser User Name & Password	8
Email Notification Setup	8
Central Station Setup (future)	9
Setup of DDNS (future)	9
Notes on Router Setup	10
Connecting ElkRP to the Control over a Network	11
Updating the M1XEP Firmware	12
Using the Virtual Keypad Application	13
Glossary of Networking Terms	19

IMPORTANT NOTICE:

The M1XEP has been shipped with the non-secure port enabled. It is strongly recommended that you configure the M1XEP to use the secure port for communications outside of the local network. If you will connect to the local network using the non-secure port, it is strongly recommended that the M1XEP be behind a network router. Do not port forward the non-secure port to outside the local network. If the non-secure port will not be used it should be disabled in the M1XEP setup (refer to section 1.7 of the configuration and setup).

Page 2 ELK-M1XEP Installation Manual