AT&T IPC-1600 manual None XON/XOFF RTS/CTS Both

Installation Procedure

The H)andshake option is used to select the flow control for the selected channel (port). The following screen display shows how to select the flow control options.

A) NONE B) XON/XOFF C) RTS/CTS D) BOTH

S e l e c t H a n d s h a k e P r o t o c o l :

The N)ame option is used to change the MS-DOS name assigned to the channel. No name is used if INT 14 support has been selected. The following screen display shows how to specify a new channel name.

Old Name : COM5 New Name (8 characters max . ) :

The C)hange Chnl# option is used to select the target channel for the other options in this group.

2-12 IPC-1600 USER’S GUIDE