Installation Procedures
Comment 1: The installation software displays are dynamic and depend on the type and configuration of the machine. All possibilities are not presented in the examples.
Comment 2: AT&T Framed Access Command Environment (FACE) subsystem is an optionally orderable product. If available, the AT&T FACE software should be installed before installing the
Specify the Type of Installation
At the start of the installation process, you may be asked to specify what is to be installed. The following screen shows the installation options with AT&T FACE subsystem already installed.
Please select the type of installation from the list below:
1. Install device driver only.
2.Install device driver and FACE administration menus.
3.Quit
Type:
