AT&T IPC-1600 manual Features

Features

The IPC-1600 works in either 16-bit or 32-bit expansion I/O slots.

The IPC-1600 provides sixteen identically configured serial I/O ports with a full complement of Electronic Industries Association (EIA) RS-232C/Consultative Committee International Telegraph and Telephone (CCITT) V.28 standard interface on both input and output supporting the following signals:

■Transmit Data (TD)

■Receive Data (RD)

■Data Terminal Ready (DTR)

■Data Set Ready (DSR)

■Receive Line Signal Detector (RLSD) or Data Carrier Detect (DCD)

■Request To Send (RTS)

■Clear To Send (CTS)

■Ring Indicator (RI)

■Signal Ground (SG).

Each serial port has the following capabilities:

■Full or half-duplex mode.

■Programmable data bits (5, 6, 7 or 8).

■1 or 2 stop bits.

■Error detection:

❑Framing errors

❑Parity errors

❑Loss of carrier

❑Break handling.

■Parity options: EVEN/ODD/NONE parity.

SYSTEM FEATURES 6-1