AT&T IPC-1600 manual Channel Parameters Option

Installation Procedure

Channel Parameters Option

The following screen shows the initial display for changing parameters for a given IPC-1600 board. The display shows the default parameters. After selecting a channel, options are presented for changing the ENABLE, BAUD, MODE, HANDSHAKE, and NAME parameters. The display is automatically updated to show what channel has been selected and to show the parameter data.

BOARD 1 PARAMETERS

CHANL ENABLE BAUD MODE HANDSHAKE NAME

---------------------------------------------------

4	DSBL	9600	N,8,1	NONE	COM5
5	DSBL	9600	N,8,1	NONE	COM6
6	DSBL	9600	N,8,1	NONE	COM7
7	DSBL	9600	N,8,1	NONE	COM8
8	DSBL	9600	N,8,1	NONE	COM9
9	DSBL	9600	N,8,1	NONE	COM10
10	DSBL	9600	N,8,1	NONE	COM11
11	DSBL	9600	N,8,1	NONE	COM12
12	DSBL	9600	N,8,1	NONE	COM13
13	DSBL	9600	N,8,1	NONE	COM14
14	DSBL	9600	N,8,1	NONE	COM15
15	DSBL	9600	N,8,1	NONE	COM16
16	DSBL	9600	N,8,1	NONE	COM17
17	DSBL	9600	N,8,1	NONE	COM18
18	DSBL	9600	N,8,1	NONE	COM19
19	DSBL	9600	N,8,1	NONE	COM20

Select Channel (#/Q) :

2-10 IPC-1600 USER’S GUIDE