Index
Installation Procedure (Continued)
Reconfigure the Boards If Necessary, 2-14
Installation Procedures,
Assigning an I/O Address, 3-12
Assigning Board-Unique Hardware Interrupt Request Level, 3-11Assigning Board-Unique Starting Controller Memory Address, 3-13Completing Driver Installation, 3-17
Confirming the Data, 3-15
Specify Shared or Board-Unique Controller Memory Assignment, 3-8Specify Shared or Board-Unique Hardware Interrupt Assignment, 3-7Specify the Number of Boards, 3-10
Specify the Type of Installation, 3-5
IPC-1600 Administration Via hipcutils, 5-6
IPC-1600 Architecture, 1-5
IPC-1600 Diagnostics,
Copy Diagnostics to the System Disk, 7-3
How to Run Diagnostics, 7-5
IPC-1600 Test Descriptions, 7-8
IPC-1600 Test Descriptions,
Host 64KB Dual-Ported Memory Tests, 7-8
Host/IPC-1600 Interface Tests, 7-8
IPC-1600 16K Local Memory Tests, 7-8
IPC-1600 64K Dual-Ported Memory Tests, 7-8
IPC-1600 Communication Ports Tests, 7-9
IPC-1600 FEPOS Integrity Tests, 7-8
J
Jumper J1, A-12
L
Limitations of the IPC-1600 MS-DOS Device Driver, 2-18Local Program Memory Size Select Jumper J1, A-12Location Information,
Switch, Jumper, and Connector, A-1
