Data Circuit-Terminating Equipment
(DCE) Connections
Overview
Adapters are separately orderable for connecting the 10-pin IPC-1600 serial I/O ports and the host system DB-25 integral port to serial printers, I/O terminals, and modems configured as Data Circuit-terminating Equipment (DCE).
AT&T ACU/MODEM (DCE) Adapters
The AT&T ACU/MODEM (DCE) Adapter is an RJ-45 (10) to DB-25 DCE connector. Both male (COMCODE 846362754) and female
(COMCODE 846362762) RJ-45 (10) to DB-25 versions of this adapter are available. Figure B-9shows the connection diagram of the AT&T ACU/MODEM (DCE) Adapter. This adapter is used to connect an IPC-1600 serial port to a terminal/printer or Automatic Calling Unit (ACU)/MODEM configured as DCE.
AT&T Remote Console Adapter
The AT&T Remote Console Adapter (COMCODE 846362770) is an RJ-45
(10)to male DB-25 connector. The AT&T Remote Console Adapter provides the signal connections necessary to stay in communication with the host system when the host system reboots or resets. Figure B-10shows the connection diagram of the AT&T Remote Console Adapter. Note that a
10 pin to female DB-25 AT&T ACU/MODEM (DCE) Adapter is used at the host system integral port to connect to the 10-conductor modular cable. The AT&T Remote Console Adapter connects the modular cable to an ACU/MODEM. The AT&T Remote Console Adapter can also be used with a 10-conductor modular cable to connect an IPC-1600 serial port to an ACU/MODEM or other DCE having a need for the special features of this adapter.
B-16 IPC-1600 USER’S GUIDE
