16-Ports Fanout Module Assembly
The 16-Ports Fanout Module Assembly provides sixteen RJ-45 type, 10-pin modular jack connectors. Two 80-conductor ribbon cables connect the modular jack connectors to the two 80-pin headers (P3 and P4) on the IPC-1600 board. Figure B-3shows the 16-Ports Fanout Module Assembly. Cable/header signal and pin information is described previously in the “IPC-160080-pin Headers P3 and P4” section. The RJ-45 type connectors signal and pin information is provided later in the “RJ-45 Type Modular Jack Connector” section.
SERIAL l/O DEVICE INTERFACE B-7
