JVC RX-9010VBK Press and hold AUDIO POWER ON 2.Press CD, Release AUDIO POWER ON, Manufacturer

After pressing DVD MENU (only for the main room operations), these buttons can be used for the DVD menu operations.

Note:

MENU	TEXT
	DISPLAY

SET

DVD

EXIT

MENU

Manufactures' codes for TV

Manufacturer	Codes
JVC	00*, 14, 74
FISHER	05
HITACHI	08, 09, 10, 49
MAGNAVOX	08, 17, 49
METS	50, 51, 52, 53
MITSUBISHI	08, 18
PANASONIC	24, 26, 76

For detailed menu operations, refer to the instructions supplied with the discs or the DVD player.

Note:

Refer to the manual supplied with your DVD player.

5.Try to operate your DVD player by pressing one of the above buttons.

• DO NOT forget to turn on the DVD player before pressing

one of the above buttons.

If there are more than one code listed for your brand of DVD

player, try each one until the correct one is entered.

PHILIPS	17
QUELLE	52, 53, 54, 55, 56, 57, 58,
	59, 60, 61, 62, 63, 64, 65,
	66, 67
RCA/PROSC	08, 24, 29, 30, 31, 48
SAMSUNG	08, 34, 49
SANYO	05
SHARP	38, 77
SONY	39
TOSHIBA	37, 43
ZENITH	45, 46

*This figure is set to the remote control as the initial JVC cord.

To change the transmittable signals for operating a CD player

1.Press and hold AUDIO POWER ON.

2.Press CD.

3.Enter manufacturer’s code using buttons 1–9,

and 0.

See page 71 to find the code.

4. Release AUDIO POWER ON.

After pressing CD (with the remote control mode selector set to “TV”), you can perform the following operations on a CD player:

1 – 9, 0, +10:	Selects the tracks.
PLAY:	Starts playing.
4:	Returns to the beginning of the current (or
¢:	previous) track.
	Skips to the beginning of the next track.
STOP:	Stops playing.
PAUSE:	Stops playing temporarily. To release it, press
	PLAY.

Note:

Refer to the manual supplied with your CD player.

5.Try to operate your CD player by pressing one of the above buttons.

•DO NOT forget to turn on the CD player before pressing one of the above buttons.

If there are more than one code listed for your brand of CD,

try each one until the correct one is entered.

Manufactures' codes for DBS tuner

Manufacturer	Codes
JVC	56, 57*, 67
AMSTRAD	43, 44, 45, 46, 47, 48, 49
BLAUPUNKT	30
ECHOSTAR	50, 51, 67
GOLDSTAR	31
GRUNDIG	32, 33
HIRSHMANN	48, 52, 53, 54, 55
INSTRUMENT	68
ITT/NOKIA	34
KATHREIN	52, 58, 59, 60, 61, 62, 63
NEC	35, 36
ORBITECH	48
PHILIPS	37, 38
RCA	65
SAMSUNG	39, 40
SCHWAIGER	61, 64
SIEMENS	41, 42
SONY	66
TECHNISAT	48

*This figure is set to the remote control as the initial JVC cord.

Note:

Manufacturers’ codes are subject to change without notice. If they are

changed, this remote control cannot operate the equipment.

Continued to the next page.

70