Getting Started, Before Installation | JVC RX-9010VBK specs

Getting Started

This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply.

Before Installation

General

•Be sure your hands are dry.

•Turn the power off to all components.

•Read the manuals supplied with the components you are going to connect.

Locations

•Install the receiver in a location that is level and protected from moisture.

•The temperature around the receiver must be between –5˚C and 35˚C (23˚F and 95˚F).

•Make sure there is good ventilation around the receiver. Poor ventilation could cause overheating and damage the receiver.

Handling the receiver

•Do not insert any metal object into the receiver.

•Do not disassemble the receiver or remove screws, covers, or cabinet.

•Do not expose the receiver to rain or moisture.

Checking the Supplied Accessories

Check to be sure you have all of the following items, which are supplied with the receiver.

The number in the parentheses indicates quantity of the pieces supplied.

•Remote Control (1)

•Batteries (2)

•AM Loop Antenna (1)

•FM Antenna (1)

•RF Rod Antenna (1)

•IR Signal Transmitter (1)

Connecting the FM and AM Antennas

FM Antenna Connections

A		ANTENNA	75	B		ANTENNA	75
A			FM				FM
			COAXIAL				COAXIAL
	AM		AM		AM		AM
	AM		EXT		AM		EXT
	LOOP		EXT		LOOP		EXT
	LOOP				LOOP

FM Antenna

ANTENNA Extend the supplied FM antenna horizontally.

FM 75

COAXIAL

AM	Outdoor FM Antenna Cable
LOOP

AM

EXT (not supplied)

A. Using the Supplied FM Antenna

The FM antenna provided can be connected to the FM 75Ω COAXIAL terminal as a temporary measure.

B. Using the Standard Type Connector with Outdoor FM Antenna (Not Supplied)

A standard type connector should be connected to the FM 75Ω COAXIAL terminal.

Note:

If reception is poor, connect the outdoor antenna.

Before attaching a 75Ω coaxial cable (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM antenna.

If anything is missing, contact your dealer immediately.

5

Image 8

JVC RX-9010VBK Getting Started, Before Installation, Checking the Supplied Accessories, Connecting the FM and AM Antennas

Contents

RX-9010VBK Mises en garde, précautions et indications diverses For Canada/pour Le Canada Table of Contents Features Precautions Introduction Parts Identification Front PanelDVD MULTI, DVD, VCR 1, VCR 2, Video AUDIO, FM/AM Remote Control TV/CATV/DBS POWER, VCR 1 Power 67 Before Installation Checking the Supplied AccessoriesConnecting the FM and AM Antennas Getting Started Connecting the Speakers Basic connecting procedureConnecting the front speakers AM Antenna Connections Connecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker Analog Connections CD recorder Cassette deck or MD recorderVCRs SOUND/DBS, do not connect the TV’s video Output to these video input jacksTo audio Output Digital output terminal Digital ConnectionsDigital input terminals Change the PC audio setting USB ConnectionLamp on the USB Audio button lights up USB cable Rotate the fixing nut to attach the RF rod antenna firmly Find the place where you attach the IR signal transmitterInsert the RF rod antenna to the RF Remote Antenna terminal Connecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet Replace the cover Multi-room Operations Required Speaker Connections for the Sub-roomMerits Demerits Basic Operating Procedure for Main Room Press PowerPress Audio Power on Select and play a source Standby lamp on the front panel Basic Operating Procedure for Sub-RoomSet Main ROOM/SUB Room selector to SUB Room For the main room operations Turning the Power On and Off StandbyMain Room Basic Operations Canceling the Main Room Operations Selecting the Main Room Source to PlaySelecting different sources for picture and sound To stop the main room operations and sounds from the main Adjusting the Main Room Volume Speaker and signal indicators on the displaySpeaker indicators Signal indicators Adjusting the Equalization Patterns Listening at Night Midnight Mode Reinforcing the Bass Attenuating the Input SignalActivating the Subwoofer Sound Muting the Main Room Sound Recording a Source Selecting the Line Direct Function Using the Sleep TimerChanging the Display Brightness Sub-Room Operations Press SUB Room ON/OFF. SUB Room on /OFFPress SUB Room CONTROL. SUB Room Control For the sub-room operations Canceling the Sub-room Operations To turn off the power into standby mode, pressAudio Power Standby SUB Room ON/OFF Adjusting the Sub-room Volume To increase the volume, turn MasterTo decrease the volume, turn it counterclockwise To increase the volume, press Volume + Activating the Sub-room Front Speakers Muting the Sub-room SoundThrough the front speaker in the sub Room Operating the Playback Source for Sub-room Basic Settings Setting the Front Speakers Either for Main Room or Sub-roomAdjusting the Front Speaker Output Balance To adjust the balance Adjusting the Subwoofer Output Level Setting the Subwoofer Information Setting the Speakers for a Surround Field Digital Input Digital in Terminal Setting To select the appropriate digital Terminal settingCross Over appears on Display Press Control UP 5/ Down Control Terminal settings Selecting the Analog or Digital Input ModeWhich you want to change the input mode To set the Digital 2/3/4 terminals To select the appropriate video Input terminal Selecting the Video Input TerminalVideo DVD or Video DBS Appears on the display Changing the Source Name Showing the Text Information on Display Basic Setting and Adjustment Auto Memory To store the volume levelTo recall the volume level To cancel the One Touch Operation Receiving Radio Broadcasts Using Preset TuningTuning in Stations Manually Selecting the FM Reception Mode DSP modes Creating a Surround Field in the Main RoomSurround modes DVD Multi Playback Mode Headphone DSP modeReproducing the Sound Field 3D-PHONIC modes Available DSP Modes According to the Speaker Arrangement Available DSP modesTheater \ Theater Live Club \ Dance Club \ Pavilion Adjusting the Surround Modes Adjust the center tone Adjusting the DAP ModesPress Center Tone to select the center tone level you want CTR Tone 1 CTR Tone 2 CTR Tone Dance CLUB, or Pavilion appears on the display Adjust the overall levels of the effect. EffectAdjust the room size sense of spaciousness Adjusting the Surround Modes with DAP Modes Adjust the speaker output levels 10 dB to +10 dB Press DSP Mode repeatedly until DAP mode you want to adjustPress Effect to adjust the overall Press Surround ON/OFF to Activate an appropriate Surround Activate an appropriate Surround Adjust the liveness Press DSP Mode repeatedly untilAdjusting the 5 CH/4 CH Stereo Mode Adjust the center tone for 5CH Stereo only Adjusting the 3D-PHONIC Modes Center tone level you want for 5CH +10Stereo only Center CTR Rearl Rearr 3D Action or 3D Digital Press Center to select the center speaker Using the DVD Multi Playback Mode Activating the DVD Multi Playback ModeAdjust the speaker output levels From -10 dB to +10 dB Press DVD Multi so that DVD Using the On-Screen Menus Press %/ Þto move to the frequency you want to adjust Press %/ Þto move to Sound CONTROL, then press @/ #Press @/ # Want Press %/ Þto move to Mode you want toSelect DVD Multi as the playing source To Line Direct Press @/ #to turnLine direct function On or OFF Press %/ Þto move to SETTING, then press @/ # Storing the Preset Stations Also seeSetting the Basic Setting Items Press %/ Þto move to Tuner CONTROL, then press @/ # Compu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverRX-9010VBK Turntable Synchronized Recording Same timePress the play 3 button on the CD player Text Compu Link Remote Control System CD player MD recorderDisplaying the Disc Information on the TV screen Disc Search Only for CD Player Press Text Display while CD or MD is selected as the source Disc Information screenShowing the Disc Information on the TV Screen To exit from the Disc information screen Press Text Display while CD is selected as the source Press %/ Þto move to SEARCH, then pressPress %/ Þto move to Performer Then press SET Press SET again Press %/ Þto move to SEARCH, then press SET Press %/ Þto move To GENRE, then Press SETPress %/ Þto move To Title INPUT, then press SET Entering the Disc Information Press %/ Þto move to the genre you want, then press SET Press Text Display while MD is selected as the sourcePress %/ Þto move to Title Input Then press SET For the MD recorder AV Compu Link Remote Control System Connections 1 IR Signal Transmitter ConnectionIR signal transmitter Connections 2 AV Comp Link Connection To the TVs’ Video Input 1 terminal using S-video cables Connections 3 Video Cable ConnectionCase One-Touch Video Play One-Touch DVD Play Automatic Power On/Off StandbyAutomatic Power On Operating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section Amplifier CD player-changer CD recorderTurntable Cassette deck Operating Video Components TV/CATV/DBS selectorMain ROOM/SUB Room selector VCR VCR connected to the VCR 1 jacks Enter manufacturer’s code using buttons 1-9, Release TV/CATV/DBS PowerOperating Other Manufacturers’ Equipment Try to operate your TV by pressing Release VCR 1 Power Try to operate your VCR by pressing VCR 1 PowerVCR 1 Power If there are more than one code listed for your brand Release Audio Power on If there are more than one code listed for your brand of CDManufactures codes for TV Manufacturer Codes Manufactures codes for DBS tuner Manufacturer Codes Manufactures codes for Catv converter Manufacturer Codes Manufactures codes for VCR Manufacturer CodesManufactures codes for DVD player Manufacturer Codes Manufactures codes for CD player Manufacturer Codes Troubleshooting Problem Possible Cause Solution CATV/DBS Specifications AmplifierFM tuner IHF AM tuner Qualityservice Factory Service Center Locations781 954 650 Valley Road Wayne, NJ Limited Warranty AUDIO-2 0201NHMMDWJEIN