9. Press CENTER TONE to select the center tone level you want.
The center tone adjustment affects the mid- frequency range, which the human voice is mostly made up of.
•Each time you press the button, the display changes to show the following:
CTR TONE 1 
CTR TONE 2 
CTR TONE 3
(Softer)(Soft)(Flat)
4.Adjust the center tone.
1)Press EFFECT repeatedly until “CTR TONE” appears on the display.
The display changes to show the current setting.
2)Press CONTROL UP 5/DOWN °to select the center tone level you want.
•Each time you press the button, the display changes to show the following:
EFFECT
CONTROL
DOWN UP
CTR TONE 5 |
| CTR TONE 4 |
| ||
(Sharper) |
| (Sharp) |
To make the dialogue softer, select “CTR TONE 1” or “CTR
TONE 2.”
To make the dialogue clearer, select “CTR TONE 4” or “CTR TONE 5.”
When “CTR TONE 3” is selected, no adjustment is applied.
On the front panel:
You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.
1. Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with |
|
| DOLBY SURROUND | mark. |
|
• To enjoy Dolby Digital, play back a software encoded with Dolby
Digital and labeled with 
mark.
D I G I T A L
•To enjoy DTS Digital Surround, play back a software encoded
with DTS Digital Surround and labeled with 
mark.
2. Press SURROUND ON/OFF to | SURROUND ON/OFF |
| |
activate an appropriate Surround |
|
mode — PRO LOGIC, DOLBY |
|
DIGITAL or DTS SURROUND. |
|
The SURROUND ON/OFF lamp on the front panel button lights up.
•Each time you press the button, the Surround mode turns on and off alternately.
•When “PRO LOGIC” is selected, the PRO LOGIC indicator lights up on the display.
3. Adjust the speaker output levels. | LEVEL |
| ADJUST |
CTR TONE 1
CTR TONE 2 
CTR TONE 3
(Softer)(Soft)(Flat)
CTR TONE 5 |
| CTR TONE 4 |
| ||
(Sharper) |
| (Sharp) |
To make the dialogue softer, select “CTR TONE 1” or “CTR
TONE 2.”
To make the dialogue clearer, select “CTR TONE 4” or “CTR
TONE 5.”
When “CTR TONE 3” is selected, no adjustment is applied.
Adjusting the DAP Modes
You can also use a DAP mode with a Surround mode (see page 43).
IMPORTANT:
Check to see if the proper indicator(s) and information appear on the display on the front panel before/while using the buttons and controls.
For the main room operations:
•The MAIN ROOM indicator is lit.
•The source name for the
•When using the remote control:
– Set MAIN ROOM/SUB ROOM selector to
“MAIN ROOM.” |
|
|
|
|
|
|
| |
– Check to see if the following information |
|
|
|
|
|
| ||
MAIN ROOM SUB ROOM | ||||||||
appear on the display window on the remote |
|
|
|
|
|
| ||
control. |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| Buttons | Indications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SOUND | SOUND |
|
|
|
|
|
|
|
|
|
| |||||
| After pressing SOUND, the following function are | |||||||
| assigned to the specific number buttons: |
|
|
|
|
|
| |
1)Press LEVEL ADJUST repeatedly until one of the following indications appears on the display.
“CENTER”:
To adjust the center speaker level. “REAR L”:
To adjust the left rear speaker level. “REAR R”:
To adjust the right rear speaker level.
2)Press CONTROL UP 5/DOWN °to adjust the selected speaker output level (from
3)Repeat 1) and 2) to adjust the other speaker output levels.
CONTROL
DOWN UP
Buttons | Indications | |
EFFECT |
| |
ROOM SIZE | SOUND | |
LIVENESS | ||
| ||
CENTER TONE |
| |
CENTER | CTR | |
REAR•L | REARL | |
REAR•R | REARR | |
|
|
|
| STANDBY | ON |
Ex. “SOUND” appears on the display | MAIN ROOM SUB ROOM |
| |
MAIN ROOM | SUB ROOM TV/CATV/DBS | VCR1 | |
ON/OFF | ON/OFF POWER | POWER | |
window.
MAIN ROOM SUB ROOM
When you press the buttons listed above, the indication appears for 5 – 10 seconds for your confirmation.
41
