JVC RX-9010VBK manual CD player-changer, CD recorder, Turntable, Cassette deck, MD recorder

CD player-changer

After selecting CDDSC by pressing CONTROL repeatedly, you can perform the following operations on a CD player-changer:

PLAY:	Starts playing.
4:	Returns to the beginning of the current (or previous)
¢:	track.
	Skips to the beginning of the next track.
STOP:	Stops playing.
PAUSE:	Pauses playing. To release it, press PLAY.
1 – 6, 7/P:	Selects the number of a disc installed in a CD
	player-changer.

After pressing CD, you can perform the following operations on the CD player-changer:

1 – 10, +10: Selects a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

EXAMPLE:

•Selecting disc number 4, track number 12, and starting playback.

1.Press CONTROL repeatedly until “CDDSC” appears on the display window, then press 4.

2.Press CD, then press +10, 2.

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301)

you can do the following operations using the number buttons after pressing CD.

1.Select a disc number.

2.Then select a track number (always enter two digits).

3.Start playback.

EXAMPLES:

•Selecting disc number 3, track number 2, and starting playback. Press 3, then, 0, 2, then PLAY.

•Selecting disc number 10, track number 5, and starting playback. Press 1, 0, then, 0, 5, then PLAY.

•Selecting disc number 105, track number 12, and starting playback. Press 1, 0, 5, then 1, 2 then PLAY.

CD recorder

After pressing CDR, you can perform the following operations on a CD recorder:

PLAY:	Starts playing.
4:	Returns to the beginning of the current (or
¢:	previous) track.
	Skips to the beginning of the next track.
STOP:	Stops playing.
PAUSE:	Pauses playing. To release it, press PLAY.
1 – 10, +10:	Selects a track number directly.
	For track number 5, press 5.
	For track number 15, press +10, then 5.
	For track number 20, press +10, then 10.
	For track number 30, press +10, +10, then 10.
Notes:

•When you start recording on the CD recorder, use the buttons on the CD recorder itself or on the remote control supplied with it.

•You can use either CDR or CONTROL to activate the buttons listed above. If you press CDR, the playing source also changes. On the other hand, if you press CONTROL repeatedly to select “CDR,” the playing source does not change.

Turntable

After pressing PHONO, you can perform the following operations on a turntable:

PLAY:	Starts playing.
STOP:	Stops operations.

Cassette deck

After pressing TAPE/MD or selecting “TAPE” by pressing CONTROL repeatedly, you can perform the following operations on a cassette deck:

PLAY:	Starts playing.
REW:	Fast-winds the tape from right to left.
FF:	Fast-winds the tape from left to right.
STOP:	Stops operations.
PAUSE:	Pauses playing. To release it, press PLAY.

¦REC: Press this button with the PLAY button to start recording (for the main room operation only). Press this button with the PAUSE button to enter recording pause.

Notes:

•When you use a cassette deck or MD recorder, change the source name connected to TAPE/MD terminals correctly (see page 33).

•You can use either TAPE/MD or CONTROL to activate the buttons listed above. If you press TAPE/MD, the playing source also changes. On the other hand, if you press CONTROL repeatedly to select “TAPE”, the playing source does not change.

MD recorder

After pressing TAPE/MD, you can perform the following operations on the MD recorder:

PLAY:	Starts playing.
4:	Returns to the beginning of the current (or previous)
¢:	track.
	Skips to the beginning of the next track.
STOP:	Stops playing.
PAUSE:	Pauses playing. To release it, press PLAY.

¦REC: Press this button with the PLAY button to start recording (for the main room operation only). Press this button with the PAUSE button to enter recording pause.

Note:

When you use a cassette deck or MD recorder, change the source name connected to TAPE/MD terminals correctly (see page 33).

66