JVC RX-9010VBK manual Connections 3 Video Cable Connection, Case, One-Touch Video Play

CONNECTIONS 3: Video Cable Connection

This receiver is equipped with three types of the video terminals — S-video, composite video, or component video, and the signa ls coming into this receiver through one type of video terminals can output only through the same type of the terminal. So you need to connect the VCR and/or DVD player to the TV using one of the following three ways:

		When connecting the source equipment to the receiver using the S-video terminals, connect also this receiver
		to the TVs’ Video Input 1 terminal using S-video cables.
			Source		RX-9010VBK		TV
CASE 1			Equipment	S-video cable		S-video cable
		Note:					To Video Input 1
		If you connect the DVD player and the DBS tuner to this receiver using the composite video terminals, change the video input
		terminal setting to "S/C" (see page 32).
		When connecting the source equipment to the receiver using the composite video terminals, connect also this
		receiver to the TVs’ Video Input 2 terminal (composite video input) using composite video cables.
			Source		RX-9010VBK		TV
CASE 2			Equipment
				Composite		Composite
				video cable		video cable
	Note:						To Video Input 2
	If you connect the DVD player and the DBS tuner to this receiver using the S-video terminals, change the video input terminal
	setting to "S/C" (see page 32).
		When connecting the source equipment to the receiver using the component video terminals, connect also this
		receiver to the TVs’ Video Input terminals (component video input) using component video cables.
CASE 3			Source		RX-9010VBK		TV
			Equipment	Component		Component
				video cable		video cable
	Note:						To Video Input 2
	If you connect the DVD player and the DBS tuner to this receiver using the video component terminals, change the video input
	terminal setting to "COMPNT" (see page 32).

The AV COMPU LINK remote control system allows you to use the five basic functions listed below.

Remote Control of the TV, DVD player, and VCR Using This Remote Control

IMPORTANT:

To operate the video components using the IR signal transmitter (supplied), place it so that it is aimed at the remote sensor on the target video component(s).

•The IR signal transmitter can send signals at a distance of 10 feet (3 m).

TV

DVD player DVD

VCR

One-Touch Video Play

•Simply by inserting a video cassette without its safety tab into the VCR 1 (the VCR connected to the VCR 1 jacks), you can enjoy the video playback without setting other switches manually. The receiver automatically turns on and changes the main room source to “VCR 1.”

The TV automatically turns on and changes the input mode to the position so that you can view the playback picture.

When you insert a video cassette with its safety tab, press the play (3) button on the VCR 1 or on its remote control. So, you can get the same result.

–If the receiver is already turned on, and the SUB ROOM indicator and the source name for the sub-room are lit on the display, the receiver changes the sub-room source to “VCR 1.” (In this case, the TV will not turn on automatically.)

•When you press PLAY on the remote control supplied with this receiver for operating the VCR 1, the receiver automatically turns on and changes the main room source or sub-room source (depending on MAIN ROOM/SUB ROOM selector setting on the remote control) to “VCR 1.”

–For main room operations only: The TV automatically turns on and changes the input mode to the position so that you can view the playback picture.

RX-9010VBK

IR signal transmitter

You can control the connected video components using this remote control: Aim the remote control at the remote sensors on the target video component(s) or on the receiver directly.

For details, see page 62.

63