JVC RX-9010VBK manual Activating the Sub-roomFront Speakers, Muting the Sub-roomSound

Models: RX-9010VBK

1 80
Download 80 pages 6.86 Kb
Page 29
Image 29
Activating the Sub-room Front Speakers

Activating the Sub-room Front Speakers

This section is not for the persons who connect the sub-room front speakers to the SUB ROOM PRE OUT jacks using another amplifier (see page 14).

Before you start, remember...

When shipped from the factory, both pairs of the front speakers have been set to be used in the main room. To use the front speakers connected to the FRONT 2/SUB ROOM SPEAKERS terminals for the sub-room, see “Setting the Front Speakers Either for the Main Room or Sub-room” on page 27.

On the front panel ONLY:

Press SPEAKERS ON/OFF SUB ROOM to activate the front speakers in the sub-room.

The SPEAKERS SUB ROOM indicator lights

1

up on the display.

Each time you press the button, the lamp on the button turns on and off.

2

To deactivate the front speakers in the sub- room, press

SPEAKERS ON/OFF SUB ROOM again.

Note:

If the center speaker or rear speakers are used for the Surround/DSP mode (see page 37) for the main room operations,

the SPEAKERS ON/OFF SUB ROOM button does not work.

Muting the Sub-room Sound

From the remote control ONLY:

Press MUTING to mute the sound

MUTING

 

through the front speaker in the sub-

 

room.

 

The volume level indicator goes off.

To restore the sound, press MUTING again so that the volume level indicator appears on the display.

Turning MASTER VOLUME on the front panel or pressing VOLUME +/– on the remote control also restores the sound.

Operating the Playback Source for the

Sub-room

When you select “FM” or “AM” as the sub-room source, you can do the following:

– Tune into any station frequency manually (see page 35).

FM/AM TUNING

/REW

PLAY

FF/

 

DOWN

TUNING

UP

On the front panel

From the remote control

– Select a preset station (see pages 35 and 36).

 

L—BALANCE—R

EFFECT

 

1

2

3

FM/AM PRESET

CENTER

SUBWFR

ROOM SIZE

4

5

6

 

 

REAR·L

REAR·R

LIVENESS

 

7/P

8

9

 

DIGITAL EQ

 

CENTER TONE

 

10

0

+10

 

RETURN

FM MODE

100+

On the front panel

From the remote control

– Select FM reception mode (see page 36).

FM MODE

 

0

 

FM MODE

On the front panel

From the remote control

When you select the other sources as the sub-room source, you can operate them by using the remote control supplied with this receiver. (“TV SOUND,” “DVD MULTI” and the digital input cannot be selected as the sub-room source.)

If they are one of the JVC products equipped with the COMPU LINK remote control system or the AV COMPU LINK remote control system, see pages 55 to 64.

If they are one of the JVC products, but not equipped with the above remote control systems, or if they are the products of the other manufacturers, see pages 65 to 71.

CAUTION:

Be careful not to turn up the volume so high when controlling the receiver without listening to the playback sound. For example, when adjusting the volume level in the sub-room from the main room.

Notes:

Any sound adjustments such as the Surround/DSP modes cannot be applied to the sub-room source. You can only adjust the volume level.

The One Touch Operation function (see page 34) cannot be used for the sub-room sources.

26

Page 29
Image 29
JVC RX-9010VBK manual Activating the Sub-roomFront Speakers, Muting the Sub-roomSound, On the front panel ONLY