Operating Video Components
IMPORTANT:
To operate JVC’s video components using this remote control:
•You need to connect JVC video components through the AV COMPU LINK jacks (see page 62) in addition to the connections using cables with RCA pin plugs (see pages 8 and 9).
•Some JVC VCRs can accept two types of the control signals — remote codes “A” and “B.” Before using this remote control, make sure that the remote control code of the VCR connected to the VCR 1 terminals is set to code “A.”
–When another JVC VCR is connected to the VCR 2 and VIDEO jacks, set its remote control code to code “B.” (This remote control cannot emit the control signals of code “B.”)
•To operate the video component(s) using the remote control:
–Aim the remote control directly at the remote sensor on each component, not on the receiver.
•To operate the video component(s) using the RF signals emitted from this remote control, the IR signal transmitter and the RF rod antenna must be connected to this receiver.
–Place the IR signal transmitter so that it is aimed at the remote sensor on the target video component(s).
–The RF
–The IR signal transmitter can send signals at a distance of 10 feet (3 m).
When using the remote control:
Check to see if MAIN ROOM/SUB ROOM selector and TV/CATV/DBS selector are set to the correct positions:
• TV/CATV/DBS selector:
To operate TVs, set it to “TV.” | TV | ||
|
|
|
|
• MAIN ROOM/SUB ROOM selector: | CATV/ |
| |
DBS | |||
|
|
| |
|
|
|
|
Set MAIN ROOM/SUB ROOM selector to “MAIN ROOM.”
–For the sub-room operations
Set MAIN ROOM/SUB ROOM selector to
“SUB ROOM.”
MAIN ROOM SUB ROOM
–Check to see if the following information
appear on the display window on the remote control:
MAIN ROOM/ | Indications |
SUB ROOM selector |
|
MAIN ROOM | MAIN ROOM * |
SUB ROOM | SUB ROOM * |
|
|
*MAIN ROOM or SUB ROOM indicator does not appear when no indicators appear on the display window.
Buttons | Indications | |
VCR 1 | VCR 1 | |
DVD or DVD MULTI | DVD | |
TV/DBS | TV | |
CONTROL (repeatedly) | VCR1 =TAPE =CDR = | |
CDDSC =(back to the beginning) | ||
| ||
DVD MENU | DMENU | |
|
|
After selecting a source:
VCR (VCR connected to the VCR 1 jacks)
You can always perform the following operations:
VCR 1 POWER: Turns on or off the VCR 1.
After pressing VCR 1 or selecting “VCR” by pressing CONTROL repeatedly, you can perform the following operations on a VCR:
1 – 9, 0: | Selects the TV channels on a VCR. |
PLAY: | Starts playing. |
REW: | Rewinds a tape. |
FF: | Fast winds a tape. |
STOP: | Stops operations. |
PAUSE: | Pauses playing. To release it, press PLAY. |
¦REC:Press this button with the PLAY button to start recording (only for the main room operations).
Press this button with the PAUSE button to enter
recording pause.
CHANNEL
Note:
You can use either VCR 1 button or CONTROL to activate the buttons listed above. If you press VCR 1, the playing source also changes. On the other hand, if you press CONTROL repeatedly to select “VCR1,” the playing source does not change.
DVD player
After pressing DVD (or DVD MULTI: only for the main room operations), you can perform the following operations on a DVD player:
1 – 10, 0, +10: Selects the DVD titles or the tracks. |
| ||
PLAY: | Starts playing. |
| |
4: | Returns to the beginning of the current (or |
| |
¢: | previous) track. |
| |
Skips to the beginning of the next track. |
| ||
STOP: | Stops playing. |
| |
PAUSE: | Stops playing temporarily. To release it, press | ||
| PLAY. |
| |
After pressing DVD |
| ||
MENU (only for the | TEXT | ||
| MENU | DISPLAY | |
main room operations), | |||
| |||
these buttons can be used |
| ||
| SET |
| |
for the DVD menu |
| ||
operations. | DVD |
| |
| EXIT | ||
| MENU | ||
|
| ||
Note: |
|
| |
For detailed menu operations, refer to the instructions supplied
with the discs or the DVD player.
TV
Buttons
PLAY
4/REW
FF/¢
STOP
PAUSE
1 – 9, 0, +10, 100+
CHANNEL +/–
Indications
one of the selected source names listed above
VCR1 or TV
You can always perform the following operations (with TV/CATV/ DBS selector set to “TV”):
TV/CATV/DBS POWER: | Turns on or off the TV. |
TV VOL | Adjusts the volume. |
TV/VIDEO: | Sets the input mode (either TV or |
| VIDEO). |
After pressing TV/DBS (with TV/CATV/DBS selector set to “TV”), you can perform the following operations on a TV:
After pressing DVD MENU:
Buttons | Indications |
|
|
%, Þ, @, #, SET | DMENU |
When you press the buttons listed above, the corresponding
indication appears for 5 – 10 seconds for your confirmation.
67
CHANNEL | Changes the channels. |
1 – 9, 0, 100+: | Selects the channels. |
RETURN: | Alternates between the previously selected |
| channel and the current channel. |
