JVC RX-9010VBK Multi-roomOperations, Required Speaker Connections for the Sub-room, Connection •

Multi-room Operations

Before operating this receiver any further, be familiar with this Multi-room function.

This function enables you to listen to different sources in two different places (we call these two places “main room” and “sub-room”) by using this receiver only.

This section explains only required speaker connections, the concept, and basic operations of the Multi-room function. For more detailed operations, see the respective pages in this manual.

Required Speaker Connections for the Sub-room

Connection •

See also “Connecting the front speakers” on page 6.

Right speaker MAIN ROOM SPEAKERS Left speaker

FRONT 1 SPEAKERS

+ +

CAUTION :

SPEAKER IMPEDANCE

RIGHT	LEFT	RIGHT	LEFT	4	6	LOW
				8	16	HIGH
–				– SPEAKER LOAD SELECTOR
CAUTION : SPEAKER IMPEDANCE 8			16
FRONT 2 SUB ROOM SPEAKERS

Right speaker SUB ROOM SPEAKERS Left speaker

Merits:

•This connection DOES NOT require a power amplifier.

Demerits:

•When the sub-room speakers are activated, this connection DOES NOT allow you to use the Surround/DSP modes using the center/rear speakers (see page 37) and the DVD MULTI playback mode (see page 49) for the main room sources.

To use the front speakers connected to the FRONT 2/SUB ROOM SPEAKERS terminals for the sub-room

See “Setting the Front Speakers Either for the Main Room or Sub-room” on page 27, and “Activating the Sub-room Front Speakers” on page 26.

Note:

Using long speaker signal cables will deteriorate the signals, and

will result in poor sound quality.

Connection õ

Connect the input jacks of another amplifier to the SUB ROOM PRE OUT jacks on the rear panel, using a cable with RCA pin plugs (not supplied).

SUB ROOM PRE OUT

( r i g h t ) ( l e f t )

Another amplifier

Right speaker SUB ROOM SPEAKERS Left speaker

Merits:

•This connection DOES allow you to use the Surround/DSP mode using the center/rear speakers (see page 37) and the DVD MULTI playback mode (see page 49) for the main

room sources.

Demerits:

• This connection DOES require another amplifier.

To use the front speakers in the sub-room

•No settings are required on this receiver.

•Turn on and operate the other amplifier connected to the SUB ROOM PRE OUT jacks correctly.

Note:

Using long cables will deteriorate the signals, and will result in poor sound quality.

14