JVC RX-9010VBK manual Adjusting the Subwoofer Output Level, Setting the Subwoofer Information

From the remote control:

SOUND

1. Press SOUND.

The 10 keys are activated for sound adjustments.

2.Press BALANCE R or BALANCE L to adjust the balance.

• Pressing BALANCE R decreases the left	L—BALANCE—R
	1	2

channel output (from R –21 to CENTER,

from CENTER to L –21).

• Pressing BALANCE L decreases the right

channel output (from L –21 to CENTER, from CENTER to R –21).

Adjusting the Subwoofer Output Level

You can adjust the subwoofer output level if you have selected “YES” for the “SUBWOOFER” (see to the left).

• You can do this setting for each source.

Before you start, remember....

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•When the front speakers are all deactivated, the subwoofer level cannot be adjusted.

Note:

This function is applied only to the main room sources.

Setting the Subwoofer Information

Register whether you have connected a subwoofer or not.

Before you start, remember....

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel:

1.Press LEVEL ADJUST repeatedly until “SUBWFR” appears on the

display.

The display changes to show the current setting.

2.Press CONTROL UP 5/DOWN ° to adjust the subwoofer output level (from –20 dB to +10 dB).

LEVEL

ADJUST

CONTROL

DOWN UP

On the front panel ONLY:

1.	Press SETTING repeatedly until		SETTING
	“SUBWOOFER” appears on the
	display.
	The display changes to show the current setting.
2.	Press CONTROL UP 5/DOWN °	CONTROL
		DOWN UP

to select “YES” or “NO.”

•Each time you press the button, the display alternates between “YES” and “NO.”

YES: Select this when a subwoofer is connected.

NO: Select this when no subwoofer is used.

Note:

You cannot use SUBWOOFER OUT ON/OFF on the front panel (see page 21) and adjust the subwoofer output level (see to the right) when “SUBWOOFER” is set to “NO.”

From the remote control:

1.	Press SOUND.	SOUND
	The 10 keys are activated for sound
	adjustments.
2.	Press SUBWFR.	SUBWFR
		5

3.Press LEVEL + or LEVEL – to adjust the subwoofer output level from –20 dB to + 10 dB.

• Each time you press the button, “S WFR”

LEVEL+

appears on the display on the remote control.

LEVEL–

28