JVC RX-9010VBK manual 3D Action or 3D Digital, Press Center to select the center speaker

On the front panel:

1. Press DSP MODE repeatedly until

“3D ACTION” or “3D DIGITAL” appears on the display.

DSP MODE

From the remote control:

1. Press DSP MODE repeatedly until	DSP
“3D ACTION” or “3D DIGITAL”	MODE
appears on the display.

The DSP MODE lamp on the front panel button lights up, and the 3D-PHONIC and DSP indicators also light up on the display.

The DSP MODE lamp on the front panel button

lights up, and the 3D-PHONIC and DSP indicators also light up on the display.

2. Adjust the center speaker output

level.

1) Press LEVEL ADJUST repeatedly

until “CENTER” appears on the

LEVEL

ADJUST

SOUND

2. Press SOUND.

The 10 keys are activated for sound adjustments.

	display.
2)	Press CONTROL UP 5/DOWN °to
	adjust the center speaker output level
	(from –10 dB to +10 dB).
3. Adjust the center tone.
1)	Press EFFECT repeatedly until “CTR
	TONE” appears on the display.
	The display changes to show the current

CONTROL

DOWN UP

EFFECT

3.Press CENTER to select the center speaker.

4.Press LEVEL + or LEVEL – to adjust the center speaker output levels (from –10 dB to +10 dB).

• Each time you press the button, “CTR”

CENTER

4

LEVEL+

LEVEL–

setting.

2) Press CONTROL UP 5/DOWN °

to select the center tone level you

want.

The center tone adjustment affects the

mid-frequency range, which the

human voice is mostly made up of.

• Each time you press the button, the

display changes to show the following:

CONTROL

DOWN UP

appears on the display window on the remote control.

5. Press CENTER TONE to select	CENTER TONE
	+10
the center tone level you want.
	100+

•Each time you press the button, the display changes to show the following:

CTR TONE 1 CTR TONE 2 CTR TONE 3

(Softer)(Soft)(Flat)

CTR TONE 1 CTR TONE 2 CTR TONE 3

(Softer)(Soft)(Flat)

CTR TONE 5	CTR TONE 4
(Sharper)	(Sharp)

To make the dialogue softer, select “CTR TONE 1” or

“CTR TONE 2.”

CTR TONE 5	CTR TONE 4
(Sharper)	(Sharp)

To make the dialogue softer, select “CTR TONE 1” or “CTR

TONE 2.”

To make the dialogue clearer, select “CTR TONE 4” or “CTR TONE 5.”

When “CTR TONE 3” is selected, no adjustment is applied.

To make the dialogue clearer, select “CTR TONE 4” or “CTR TONE 5.”

6. Press EFFECT to adjust the overall

EFFECT

When “CTR TONE 3” is selected, no adjustment is applied.

level of the effect.

3

4.Adjust the overall levels of the effect. EFFECT

1)Press EFFECT repeatedly until “EFFECT” appears on the display. The display changes to show the current setting.

2) Press CONTROL UP 5/DOWN °	CONTROL
	DOWN UP
to select the effect level you want.

•Each time you press the button, the display changes to show the following:

EFFECT 1 EFFECT 2 EFFECT 3

EFFECT 5 EFFECT 4

As the number increases, the selected 3D effect mode becomes stronger. (Normally set it to “EFFECT 3.”)

•Each time you press the button, the effect level changes as follows:

EFFECT 1 EFFECT 2 EFFECT 3

EFFECT 5 EFFECT 4

As the number increases, 3D effect mode becomes stronger. (Normally set it to “EFFECT 3.”)

48