13. SPECIFICATIONS
| ||
IMPEDANCE: | 4 ohms | 4 ohms |
MINIMUM POWER: | 10 watts RMS | 10 watts RMS |
RECOMMENDED POWER: |
|
|
(applies to both models) | amplifiers with between 50 and 200 watts RMS or more (see below) | |
MAXIMUM POWER: |
|
|
(applies to both models) | 200 watts RMS unclipped peaks | |
FREQUENCY RESPONSE: | 77 Hz - 20 KHz ± 2 dB | 85 Hz - 20 KHz ± 2 dB |
DIMENSIONS (H x W x D): |
|
|
Left/Right speaker | 18 1/2" x 6 1/4" x 8 1/4" | 10 1/2" x 6 1/4" x 8 1/4" |
Center Channel speaker | 6 1/4" x 18 1/2" x 8 1/4" | 6 1/4" x 10 1/2" x 8 1/4" |
WEIGHT | 16 lbs. | 9 lbs. |
FIGURE 3
USE WITH AN OMNIMOUNT ® BRACKET
The drawings below are from the OmniMount catalog and are not intended to show the actual dimensions and specific mounting locations on the
S-125 and S-125C
USES OMNIMOUNT® 75-WA or 53-RST (see below)
Two threaded inserts are located at the bottom of the back baffle of the cabinet Mount the bracket to the speaker using 5/8" long 1/4" x 20 pan head or round head machine screws. Use an OmniMount® Series 75 mounting bracket.
USES OMNIMOUNT® 53-RST
A single 3/8" x 16 threaded insert is located on the back baffle of the cabinet. Use only an OmniMount® 53 RST (special order) bracket.
S125/85/Cman.pm5 rev 3
08/30/96
