HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide
Software Installation Procedure
1Double-click on the My Computer icon, then double-click on theControl Panel icon.2Double-click on the System icon. The System Properties box appears.3Click on the Device Manager tab. A list of devices appears, arranged by type.4Finally, double-click on Network Adapters. The name of the installed network interface card appears:
3Com EtherLink 10/100 PCI For Complete PC Management NIC (3C905C- TX).If this name does not appear or if a yellow exclamation mark appears next to it, follow this troubleshooting procedure:
Checking the Network Settings
5In the Device Manager window, double-click on Other Devices.6Click on PCI Ethernet Controller or the duplicate 3C905C-TXNIC entry.7Click on Remove.8Restart your PC.Follow these steps to confirm that your network setting are correct on a PC running Windows 95 or Windows 98:
1In the Control Panel window, double-click on the Network icon.2Ensure that you have the correct Client and Protocols installed. You may need to contact your MIS manager for this information.
3Finally, double-click on each of your installed protocols and ensure that your settings are correct for your PC’s connection to the LAN. You may need to contact your MIS manager for this information.
Software Installation and Update on a Windows NT 4.0 SystemWindows NT This section describes how to install the network driver in a PC4.0Users running Windows NT version 4.0 without the networking components installed.
