HP 10/100 3Com
Updating
Updating LAN-specific Fields in the HP PC
Setup Utility
You need to check that the BIOS is configured to use your network card’s features. To do this, use the HP PC Setup utility.
Starting the HP PC 1 | Restart the PC. | |
Setup Utility | 2 | Press F2 when F2=Setup is displayed on the screen during |
|
| startup. The opening window of the HP PC Setup utility is |
|
| displayed. |
Which Fields Need You need to check, and update if necessary, all the fields that are
Updating?
Enable
Disable
Update the LAN Settings
If you are using Windows 95 SR2 or Windows 98 you need to ensure that the
If you are using Windows NT 4.0 you need to ensure that the Plug-
Configure any Setup settings for the LAN interface using the following information as a guide. The names used in your version of the Setup program may be different to those shown.
If you want to boot from the network ( “Frequently Asked Questions” on page 18):
•Check that Security ➜ Boot Devices Security ➜ Start from Network is enabled.
•Change the boot order so that Network appears first (Advanced ➜ Advanced CMOS Setup ➜ 1st Boot Device <Network>).
If you want to
•Check that the PC can be woken from the network (Power ➜ Suspend Wakeup ➜ Network [Enabled]).
If you want to
•Check that the PC can be
