TC electronic SDN BHD 48 Setup Examples - Bass Management & Integration, Features in this setup

SETUP EXAMPLES - BASS MANAGEMENT & INTEGRATION

Features in this setup

•One stereo set of active speakers and one active Sub. The sub is fed with both the LFE channel signal and lo-freq signal from the main channels via bass management.

•Two separate sends for monitoring on headphones via AUX 1 and AUX 2 sends on the TC Near mixer page

•Computer with TC Near control panel and DAW application

•Integrated external digital reverb via S/PDIF and the Integrator plug-in*

•Integrated external analog filter via analog line I/O

*Please refer to the instructions for the Integrator plug in on the following pages.

Setting up

• Select DAW Main Out 1+2 as source. Set speaker to “on” and assign to main.

• Select DAW Line Out 8 as source and assign this channel as “SUB”.

• We have set a typical X-over frequency of 95 Hz. Low-pass is set to 24 dB/oct and High-pass to off.

25