FABRIK R STUDIO
Time page | Modulation page |
Decay
Range: 10 ms to 20 sec
The Decay parameter determines the length of the Reverb Diffuse Field. The length is defined as the time it takes for the Diffuse Field to decay approximately 60dB.
PreDelay
Range: 0 to 100 ms
A short Delay placed between the direct signal and the Reverb processing. A Pre Delay is often used to keep the source material clear and undisturbed by the Reverb Diffuse Field.
The algorithm designers have adjusted the diffuse field part of the reverb to be as smooth and natural sounding as possible. However, by modulating the diffuse field, the reverb will, in certain cases, integrate better with the entire signal. You may also find the modulation parameters useful simply to create new flavors of reverb.
Modulation Rate
Range:
Adjusts the Rate of modulation.
Modulation Depth
Range: 0 - 200%
Adjusts the Depth of modulation.
55