TC electronic SDN BHD 48 3Mode selector, 4Play tone, 5Pitch, 6Mute, 7Scale modes, Tuner

TUNER

3Mode selector

Click to switch between Strobe and normal mode.

Strobe mode: Sections of three red LEDs will slide left, when the played note is too low, and right when it is too high.

...out of tune (Chromatic scale-mode selected) ...in tune (C major scale-mode selected)

4Play tone

Press PLAY TONE if you want to tune acoustically to a reference tone. The played note is “A” according to the set pitch (default 440Hz).

The level of the tone can be adjusted using the small “speaker” handle located just below the PLAY TONE button.

5Pitch

Sets the reference frequency. Default value is 440Hz and the range is from 438 to 445.

6Mute

Press to mute the output of the tuner. Excellent if you need to tune visually only.

7Scale modes

The following scale modes are available via the drop down menu:

65