TC electronic SDN BHD 48 1The Konnekt select tabs, 2Page tabs, 3Add Channel, Removing a channel

CONTROL PANEL - MIXER PAGE

1The Konnekt select tabs

Use the select tabs to switch between the Konnekt units in your setup and the System Settings page.

2Page tabs

Press to navigate between the mixer, setup, effects and tuner pages for the selected Konnekt unit.

3Add Channel

To keep an easy overview, not all channels are included in the default mixer layout. You may add any idle channel or channel pair via the Add Channel drop down menu. Channels that are already displayed in the mixer are “grayed out”. Channels that you can add are “solid”.

Max I/O mixer channels are 24 in / 8 out.

Removing a channel

Just as some channels can be added, the same channels can also be removed from the mixer when not used. Channels that can be removed have a small crossed square in the upper right corner. De-click this field to remove the channel from the mixer.

See also “Auto shrink”.

4Auto shrink

Unlike the “Remove Channel” function that allows you to completely remove an input channel that you no longer use, the Auto shrink function keeps all channels in the mixer, but collapses the graphics so that idle channels take up only a minimum of space.

Example:

In this example no cables are attached to the Studio Konnekt 48’s inputs and by pressing the AUTO SHRINK button we get this view:

5Channel type

Indicates the channel type. Front panel, Digital, DAW, FireWire Output, Line etc.

6Ch1-4 auto-sensing input

Channels 1-4 connections on the front panel are auto- sensing. They automatically detect whether you have connected an XLR (microphone) or 1/4” jack (instrument), and this is displayed graphically.

11