TC electronic SDN BHD 48 Source selection, Compression, via the drop down menu Source Selection

FABRIK C STUDIO

Source selection

- via the drop down menu

Source Selection

Use the drop-down menu to select which type of material you are processing.

Each type selects a carefully tuned combination of the essential compression parameters: Attack, Release, Threshold and Ratio.

Compression

3-band and Full-band modes Gain page

Gain Control

The Gain settings are very important.

The higher set In Gain the harder the signal meets the Compressor Threshold.

•Grab GAIN and move the symbol in vertical and horizontal directions to set both In Gain and Make-up gain with just one handle.

The Threshold is automatically set when the Source type is selected, however, the Gain parameters determine how hard the signal meets the Threshold.

Depending on how the Compressor parameters are set, the level will change. The Make-up Gain parameter is used to compensate for this level change.

In Gain Range: -18 to +18 dB

Make-up Gain: -18 to +18 dB

47