FIRMWARE UPDATE & RESETTO DEFAULT
Versions
This section gives information on Control panel versions and FireWire driver.
Check for updates
•If the computer is connected to the Internet you may check for updates by pressing “CHECK FOR UPDATES”. You will be directed to the Konnekt product page at www.tcelectronic.com
•Press “Click here to download the latest version” and download the full installer.
•Run the installer.
Updating firmware
•Once the installer has been run (see above), the latest version of firmware is placed in the TC Near folder on your hard drive.
•You will now need to update the firmware for each Konnekt unit in the setup.
•Go to the “About page” for the unit you want to update.
Example
•Press UPDATE FIRMWARE and you will be directed to the folder where the firmware is located.
Example
•Select the “xxx.bin” file with the highest number. This is the latest released firmware.
•Now press “Open” and wait while the firmware is being updated.
Reset to Default
The Reset to Default function will reset the selected Konnekt unit to factory default settings for the currently loaded software.
The software will not be degraded to previous 
software versions and no presets are affected.
69
