TC electronic SDN BHD 48 bandmode only Compressor Control page, Compressor control, Compression

FABRIK C STUDIO

Compression

3-band mode only Compressor Control page

Compressor control

The Low, Mid and High parameters indicate the set compression amount for the three bands.

•Grab COMP and position this icon freely within the triangle to distribute the amount of compression on the three bands.

If the compression should primarily be on the low end frequencies move COMP in that direction. Likewise with the Mid and High areas.

Where the Gain parameter is used to gain the input of the Compressor and also set the Make-up gain on the output, the Compression Control adjusts the individual compression amount on the three bands.

Compression

3-band mode only Level page

Level Control

Depending on the amount of applied compression you may need to level compensate the three individual bands.

•Grab the LEVEL and position this handle freely within the entire triangle.

Whereas the Make-up Gain function on the Gain page is used as a general level compensation on the entire signal, the Level control can be used to set the level of the three bands individually.

48