FABRIK C STUDIO
Compression
- Full-band mode
The Compressor is in
In
In
Adjusting Parameters - Compressor section
As described in the previous section the parameters on the 4 Compression pages are adjusted simply by grabbing and moving the “S”, “G”, “C” and “L” handles - however, a few extra cool features are available.
Grid
On the Source pages the “S” handle moves in vertical and horizontal directions only, but on the Compression Control, Level and Gain pages the “C”, “L” and “G” handles move freely in all directions. You may, however, see the advantage of moving the handle in one direction only. Therefore it is possible to lock a direction in a “grid”.
•Grab the “C”, “L” or “G” handle using the left mouse button.
•Press and hold the Alt key (Mac: Command key), while moving the mouse in a circle. The “compass” function is now active and you can select one of 2 to 6 directions.
•Release the Alt key (Mac: Command key)and move the mouse still holding the left mouse button pressed to select desired values.
•Release mouse button to release the grid.
49
