STUDIO CONTROL REMOTE PAGE
The Remote page handles various options for the Studio Kontrol.
Fallback to master
The big encoder is per default assigned to control the master volume. However, it can also be used to adjust the other parameters that can be selected via the Studio Kontrol buttons. Via the The Fallback to master drop- down menu you can set the time it takes before the encoder controls the master volume again after it has been assigned to another parameter.
Example:
-Notice that the LED in the MASTER button is lit, indicating that the big encoder controls the MASTER level parameter.
-Set Fallback time to 2.5 seconds.
-Press MIC1 and turn the big encoder. You are now adjusting the level of the MIC1 channel.
-Don’t touch the encoder for 2.5 seconds and see that the MASTER button is lit again indicating that the encoder now controls the master level again.
LEVEL knob - Mix push mode
The big encoder on the Studio Kontrol can also be used to adjust the following parameters; Pan/Balance, Reverb Send and AUX 1/2 send levels.
-Select the parameter from the
-Then press e.g. the MIC1 button for the front panel channel 1
-Now click once on the big volume knob and turn to adjust the parameter value
After the interval set by the “Fallback to Master“ parameter, the encoder returns to the state where it controls the master level.
38
