Targus ExpressCard Notebook Docking Station with Digital Video and Audio

Installing the Docking Station Driver

Installing the docking station driver enables your operating system to recognize the docking station and its ports once it’s connected.

1.Turn on your computer.

2.Insert the driver software CD into your computer’s CD-ROM drive.

If setup does not begin automatically, click Start, Run, and enter D:\Setup.exe (where D: is the path of your CD-ROM drive) and then click OK.

3.The Installation Wizard window of the docking station will pop up. Follow any on-screen instructions to complete the installation. Please connect the ExpressCard into the slot when prompted.

Connecting the Docking Station to Your Computer

Step 1. Connect the supplied AC power adapter to the AC power jack on the docking station.

Step 2. Connect one end of the ExpressCard cable to the docking station and the other end into the ExpressCard Card.

Step 3. Connect the ExpressCard Card into an available Express- Card slot in your notebook.

WARNING: THE DOCKING STATION WILL NOT FUNCTION PROPERLY WITHOUT THE AC ADAPTER PLUGGED INTO AN AC OUTLET.

DO NOT CONNECT ANY DEVICES TO THE DOCKING STATION UNTIL THE SOFTWARE HAS BEEN INSTALLED AND THE AC ADAPTER HAS BEEN PLUGGED IN.

8

Page 8
Image 8
Targus ACP60US specifications Installing the Docking Station Driver, Connecting the Docking Station to Your Computer