TC electronic SDN BHD 48 EQ section, Bands On/Off Grab handle to select Bands On/Off, Bypass

FABRIK C STUDIO

EQ section

The Fabrik C Studio EQ section is a 4-band parametric EQ with four selectable filter types: Notch, Parametric, Shelving and Cut. If you’re looking for a razor sharp filter, use the Notch filter that has a lower limit as low as 0.01 octaves. For a more gentle approach the shelving filter with a variable slope is a better choice. Cut filters can be switched between a 12dB/oct maximum flat amplitude (Butterworth) and a flat group delay type (Bessel). Mark the handle (1, 2, 3 or 4) for the band to adjust. Set the BW/Type, then grab the handle again and move for frequency/gain adjustments.

Bands On/Off

Grab handle to select

Bands On/Off

Click to activate/deactivate the four individual bands.

Adjusting Frequency and gain

Simply grab the symbol for one of the active bands (1, 2, 3 or 4) using the left mouse button and move until desired settings are achieved.

Adjusting BW/TYPE

First select a band. Then place the cursor within the BW/Type field, press left mouse button and move mouse up/down to change type and bandwidth. Different filter types are available for the Low, Mid and High filters. Please refer to the following pages for overview of the EQ types.

Bypass

Press to bypass the EQ section.

44