1Press SOUND.
The 10 keys are activated for sound adjustments.
2Press TEST.
“TEST TONE L” starts flashing on the display and a test tone comes out of the speakers in the following order:
TEST TONE L 
TEST TONE C 
TEST TONE R (Left front speaker) (Center speaker) (Right front speaker)
| TEST TONE LS |
|
| TEST TONE RS |
|
|
|
|
| ||
(Left surround speaker) | (Right surround speaker) | ||||
Check whether you can hear the tone through all the speakers at an equal level or not.
Note:
If the center and surround speakers are set to “NONE,” no test tone is
available.
3Select a speaker you want to adjust.
Press one of the following buttons:
FRONT L Left front speaker
FRONT R Right front speaker
CENTER Center speaker
SURR L Left surround speaker
SURR R Right surround speaker
4Press LEVEL +/– to adjust the selected
speaker output level
When you press the button once, the current setting of the selected speaker appears on the display and a test tone comes out of the selected speaker.
• “0” is the initial setting for all speakers.
5Press TEST again to stop the test tone.
Adjusting Subwoofer Output Level
Make sure the subwoofer is set to “YES” (see page 15).
1Press SOUND.
The 10 keys are activated for sound adjustments.
2Press SUBWFR.
3Press LEVEL +/– to adjust the subwoofer
output level
When you press the button once, the current setting of the subwoofer appears on the display.
• “0” is the initial setting.
Note:
Subwoofer output level cannot be adjusted in the following cases:
•When “SUBWOOFER NO” is selected for the subwoofer setting (see page 15).
•When the HEADPHONE mode is in use (see page 13).
When you use the 10 keys to operate your target source after sound adjustments, press the corresponding source selection button first so that the 10 keys work for your target source.
Sound Adjustments
Ex.: When you press FRONT L in step 2.
Repeat steps 3 and 4 to adjust other speaker output levels so that you can hear the tone through all the speakers at an equal level.
21
