JVC RX-5032VSL manual Turning Off the Power With the Sleep Timer, Basic adjustment auto memory

Basic Operations

Turning Off the Power

with the Sleep Timer

You can fall asleep while listening to music—Sleep Timer.

A/V CONTROL

RECEIVER

1	2	3
4	5	6

7/P 8 9

10 0 10

TA/NEWS/INFO

SLEEP

DISPLAY MODE

Press SLEEP on the remote control repeatedly.

•The SLEEP indicator lights up on the display.

Each time you press the button, the shut-off time changes in

10 minute intervals as follows:

10 20 30 40 50 60

0(Canceled) 90 80 70

When the shut-off time comes, the receiver turns off

automatically.

To check or change the shut-off time, press SLEEP once. The remaining time (in minutes) until the shut-off time appears.

• To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer, press SLEEP repeatedly until “SLEEP 0 MIN” appears on the display. (The SLEEP indicator goes off.)

• Turning off the power also cancels the Sleep Timer.

Basic adjustment auto memory

This receiver memorizes sound settings for each source when—:

•you turn off the power,

•you change the source, and

•you assign the source name.

When you change the source, the memorized settings for the newly selected source are automatically recalled. The following can be stored for each source:

•Input attenuator mode (see page 18)

•Tone adjustment (see page 20)

•Speaker output level (see page 20)

•Surround/DSP mode selection (see pages 26 and 27)

•RX-6030VBK and RX-6032VSL only: BASS BOOST (see page 18)

Notes:

•You cannot assign and store different settings for digital input mode and analog input mode.

•If the source is FM or AM, you can assign a different setting for each band.

For recording

You can record any sources playing through the receiver to a cassette deck (or a CD recorder) connected to the TAPE/CDR jacks and the VCR connected to the VCR jacks at the same time.

While recording, you can listen to the selected sound source at whatever sound level you like without affecting the sound levels of the recording.

Note:

The output volume level, tone adjustment (see page 20), and

Surround/DSP modes (see pages 26 and 27) do not affect the recording.

14