JVC RX-6030VBK, RX-6032VSL, RX-5032VSL manual CD player, Cassette deck, CD changer, CD recorder, 7/P

CD player

After pressing CD, you can use the following buttons for the CD operations:

3	Start playback.
4	Return to the beginning of the current
	(or previous) tracks.
¢	Skip to the beginning of the next tracks.
7	Stop playback.
8	Pause playback. To release, press 3.

1 – 10, +10 Select a track number directly.

• For track number 5, press 5.

• For track number 15, press +10, then 5.

• For track number 20, press +10, then 10.

Cassette deck

After pressing TAPE/CDR, you can use the following buttons for the cassette deck operations:

3	Start playback.
FF	Fast wind a tape from left to right.
REW	Fast wind a tape from right to left.
7	Stop playback or recording.
8	Pause playback. To release, press 3.

REC PAUSE Press this button to enter recording pause. Press this button then 3 to start recording.

Note:

Before starting the above operations, make sure that you have changed the source name correctly. See page 12.

Operating JVC’s Audio/Video Components

CD changer

After pressing CD-DISC, you can use the following buttons for the CD changer operations:

3	Start playback.
4	Return to the beginning of the current
	(or previous) tracks.
¢	Skip to the beginning of the next tracks.
7	Stop playback.
8	Pause playback. To release, press 3.
1 – 6, 7/P	Select the number of a disc installed in a CD
	changer.

After pressing CD, you can use the following buttons for the CD changer operations:

1 – 10, +10 Select a track number directly.

•For track number 5, press 5.

•For track number 15, press +10, then 5.

•For track number 20, press +10, then 10.

•For track number 30, press +10, +10, then 10.

Example:

Selecting disc number 4, track number 12, and starting playback.

1Press CD-DISC, then press 4.

2Press CD, then press +10, 2.

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301),

you can do the following operations using the number buttons after pressing CD:

1Select a disc number.

2Select a track number (always enter two digits).

3Start playback.

Examples:

•Selecting disc number 3, track number 2, and starting playback.

Press 3, then, 0, 2, then 3.

•Selecting disc number 10, track number 5, and starting playback.

Press 1, 0, then, 0, 5, then 3.

•Selecting disc number 105, track number 12, and starting playback.

Press 1, 0, 5, then 1, 2, then 3.

CD recorder

After pressing TAPE/CDR, you can use the following buttons for the CD recorder operations:

3	Start playback.
4	Return to the beginning of the current
	(or previous) tracks.
¢	Skip to the beginning of the next tracks.
7	Stop playback.
8	Pause playback. To release, press 3.

REC PAUSE Press this button to enter recording pause. Press this button then 3 to start recording.

Note:

Before starting the above operations, make sure that you have

changed the source name correctly. See page 12.

33