JVC RX-6032VSL, RX-5032VSL, RX-6030VBK manual Creating sound field, All Channel Stereo reproduction

DSP modes

7DAP (Digital Acoustic Processor) modes

DAP modes have been designed to create important acoustic surround elements.

The sound heard in a live club, dance club, hall or pavilion consists of direct sound and indirect sound—early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delayed by the distances of the ceiling and walls (see the diagram on the right).

These indirect sounds are important elements of the acoustic surround effects. The DAP mode can reproduce a realistic sound field by adding these indirect sounds.

DAP modes can be used when the front and surround speakers are connected to this receiver (without respect to the center speaker connection: no sound comes out of the center speaker even if it is connected).

The following DAP modes are provided with this receiver:

LIVE CLUB Gives the feeling of a live music club with a low ceiling.

DANCE CLUB Gives a throbbing bass beat.

HALL	Gives clear vocal and the feeling of a concert
	hall.
PAVILION	Gives the spacious feeling of a pavilion with a
	high ceiling.

These DAP modes can be used to add the acoustic surround effects while reproducing 2 channel stereo software—either analog or digital except Dolby Digital and DTS Digital Surround—and can give you a real “being there” feeling.

•When one of the DAP modes is selected, the DSP indicator lights up on the display.

Creating sound field

Reflections from behind

Early reflections

Direct sounds

7All Channel Stereo

This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers.

All Channel Stereo can be used when the front and surround speakers are connected to this receiver without respect to the center speaker connection.

If the center speaker is connected and activated, the same phase of the front left and right signals is emitted through the center speaker.

All Channel Stereo can be used while reproducing 2 channel stereo software, either analog or digital except Dolby Digital and DTS.

•When All Channel Stereo is selected, the DSP indicator lights up on the display.

All Channel Stereo reproduction

Creating Realistic Sound Fields

Normal stereo reproduction	Sound reproduced from
	All Channel Stereo

Available Surround/DSP modes for each input signal							◯:	Available ×: Not available
Modes	SURROUND	DOLBY	DTS	PL II	PL II	LIVE	DANCE	HALL	PAVILION	ALL CH
Signals	OFF (stereo)	DIGITAL	SURROUND	MOVIE	MUSIC	CLUB	CLUB			STEREO
Dolby Digital	◯	◯	×	×	×	×	×	×	×	×
(Multi-channel)
Dolby Digital	◯	×	×	◯	◯	×	×	×	×	×
(2 channel)
DTS Digital
Surround	◯	×	◯	×	×	×	×	×	×	×
(Multi-channel)
DTS Digital
Surround	◯	×	×	◯	◯	×	×	×	×	×
(2 channel)
Linear PCM	◯	×	×	◯	◯	◯	◯	◯	◯	◯
Analog	◯	×	×	◯	◯	◯	◯	◯	◯	◯

25