Sound Adjustments

English

7Tone—BASS, TREBLE

Adjust the bass and treble sounds as you like (–10 to +10 in 2 step intervals).

•“0” is the initial setting.

7Subwoofer output level—SUBWFR LEVEL

Adjust the subwoofer output level (–10 to +10 in 1 step interval).

•“0” is the initial setting.

Note:

Subwoofer output level cannot be adjusted in the following cases:

•When “SUBWOOFER NO” is selected for the subwoofer setting (see page 15).

•When the HEADPHONE mode is in use (see page 13).

7Speakers’ output level

Adjust the speakers’ output level so that you can hear sounds from each speaker at an equal level (–10 to +10 in 1 step interval).

•“0” is the initial setting for all speakers.

FRONT L LEVEL Left front speaker output level

FRONT R LEVEL Right front speaker output level

CENTER LEVEL* Center speaker output level

SURR L LEVEL* Left surround speaker output level

SURR R LEVEL* Right surround speaker output level

* You can adjust these items depending on the current speaker

settings (see page 15) and Surround/DSP mode (see “Adjustable

7Panorama control for Pro Logic II Music—

PANORAMA CTRL

You can turn on or off the Panorama control for Pro Logic II Music only when “PL II MUSIC” is activated.

Select “PANORAMA ON” to enjoy “wraparound” sound effect with side-wall image (“OFF” is the initial setting).

•For Pro Logic II Music, see page 24.

Sound Adjustments Using Remote

Control

You can also use the remote control to adjust the speaker output levels and the subwoofer output level.

•You can use the test tone to make your favourite adjustments (except for subwoofer level adjustment).

A/V CONTROL

		RECEIVER
	TEST	FRONT L FRONT R
TEST	1	2	3	FRONT R
FRONT L		CENTER	SUBWFR	SUBWFR
CENTER	4	5	6	SUBWFR
		SURR L	SURR R
SURR L	7/P	8	9	SURR R
		LEVEL

100

items and selected Surround/DSP mode” on page 27).

Notes:

SOUND

LEVEL +/–

•You cannot adjust the center speaker output level when the center speaker size is set to “NONE” (see page 15).

•You cannot adjust the surround speaker output levels when the surround speaker size is set to “NONE” (see page 15).

DISPLAY MODE

7Effect level for DAP modes—EFFECT

You can adjust the effect level for DAP modes only when one of the DAP modes is activated (EFFECT 1 to EFFECT 5).

“EFFECT 3” is the initial setting. As the number increases, the effect becomes more stronger.

•For DAP modes, see page 25.

Adjusting Speaker Output Levels Using Test Tone

The center and surround speakers are temporarily activated and you can adjust them when you are listening to stereo sound or one of the DAP modes is activated.